Extron electronic CrossPoint 88 manual Muting and unmuting video and/or audio, Operation, cont’d

Operation, cont’d

that the selected output LED, the tied input LED (input 5), and the output LEDs light for all of the outputs that are tied to the input.

EPress and release the RGBHV button to toggle the Video LED off (figure 3-10). If audio is broken away, the Audio LED stops blinking and lights.

If audio ties are established for input 5, the output LEDs for all audio outputs tied to input 5 light. If no ties are established for input 5, all output LEDs turn off.

								LED key:			= off,	= on
					INPUTS
1	2	3	4	5	6	7	8	9	10	11	12
1	2	3	4	5	6	7	8
			OUTPUTS

E

38

	Press
	E
	RGBHV AUDIO
CONTROL	I/O
ENTER PRESET VIEW	ESC RGBHV AUDIO

Figure 3-10 — Example 4, step E: Viewing the current configuration, audio-only

FPress and release the RGBHV and Audio buttons to toggle the Video LED on and the Audio LED off (figure 3-11).

If video ties are established for input 5, the output LEDs for all video outputs tied to input 5 light. If no ties are established for input 5, all output LEDs turn off.

								LED key:			= off,	= on
					INPUTS
1	2	3	4	5	6	7	8	9	10	11	12
1	2	3	4	5	6	7	8
			OUTPUTS
									F
1		3	4				8

Press	Press
F
RGBHV AUDIO
CONTROL	I/O
ENTER PRESET VIEW ESC	RGBHV AUDIO

Figure 3-11 — Example 4, step F: Viewing the current configuration, video-only

Muting and unmuting video and/or audio

Individual outputs can be muted or unmuted by doing the following:

1.	Press the Esc button to clear any input LEDs, output LEDs, or control LEDs
	that may be on.
2.	Press and release the View button.
3.	Select video, audio, or both to mute or unmute by pressing the RGBHV
	and/or Audio buttons.
4.	One at a time, press and hold the output button(s) for the desired output(s)
	for approximately 2 seconds. The output LED(s) for the selected output(s)

3-10 CrossPoint Matrix Switchers • Operation