One for All URC-7721 instruction manual Code blink out, Quick Code Reference

Code blink out

(To find out which code is currently programmed)

Once you have Set-Up your ONE FOR ALL 2, you can blink back your Set-up Code for future reference.

Example: to blink out your television code:

1.

2.

3.

4.

5.

6.

7.

Press the TV key once.

Press and hold down MAGIC until the ONE FOR ALL 2 red light blinks twice (the red light will blink once then twice).

Press 9 9 0. The red light will blink twice.

For the first digit of your four-digit code, press 1 and count all the red blinks. If there are no blinks, the digit is „0“.

For the second digit of your four-digit code, press 2 and count all the red blinks. If there are no blinks, the digit is „0“.

For the third digit of your four-digit code, press 3 and count all the red blinks. If there are no blinks, the digit is „0“.

For the fourth digit of your four-digit code, press 4 and count all the red blinks. If there are no blinks, the digit is „0“. Now you have your four-digit code.

-To blink back the code for your other devices, press the appropriate device key during step 1.

Quick Code Reference

Make sure you write down the codes for your devices in the boxes below and in the battery compartment for future easy reference.

Device Type

1……………………………………

2 ……………………………………

■ ■ ■ ■

■ ■ ■ ■

8 WWW.ONEFORALL.COM