6WWW.ONEFORALL.COM
The Search Method
If your device does not respond to the ONE FOR ALL 4 after you have tried
all the codes listed for your brand, try searching for your code. The Search
Method allows you to find the code for your device by scanning through all
the codes contained in the memory of the ONE FOR ALL 4. The Search
Method may also work if your brand is not listed at all.
Example: Tosearch for your TV code:
1Switch your television on (not on standby) and aim your ONE FOR ALL
at your TV.
2Press the TV key on your ONE FOR ALL 4.
3Press and hold down the M (MAGIC) key
until the red LED underneath the POWER key
blinks twice (the red LED will blink once
then twice).
4Press 991. The red LED will blink twice.
5Next, press POWER.
6Aim the ONE FOR ALL 4 at your Television.Now press CH+
over and over,until your Television turns off (everytime
you press the CH+ key the ONE FOR ALL 4 will send out a
POWER signal from the next code contained in the
memory). Youmay have to press this key many times (up
to 150 times) so please be patient. If you skip past a code,
you can go to the previous code(s) by pressing the CH-
key.Remember to keep pointing the ONE FOR ALL 4 at
your Televisionwhile pressing this key.
7As soon as your television turns off, press the M (MAGIC)
key to store the code.
Important notes:
- Most TV’s do not switch on pressing the POWER key. Please try pressing a
“number”key or the “TV-text off” key to switch your TV back on.
- To search for the code for another device follow the instructions above
onlypress the appropriate device key instead of TV during step 2.
- If your Video’s original remote control does not have a POWER key, press
PLAYinstead of POWER during step 5.
x2
6WWW.ONEFORALL.COM