One for All URC-7950, URC-7955, 704918 instruction manual Shifted Macros

Extra Features

Shifted Macros

You can install a Shifted Macro on any key, except for the device keys (TV, VCR, SAT and DVD), the M (MAGIC) key, and the NUMBER keys.

If for example, you want to program a shifted Macro on the POWER key, simply press M (MAGIC) once then the POWER key during step 3.

Now everytime you press M (MAGIC), then the POWER key, the ONE FOR ALL will turn off your TV, VCR and DVD Player.

• To erase the Shifted Macro from the POWER key press:

M* 9 9 5 M POWER key M*

*Here you must press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice).

-Each MACRO can consist of a maximum of 15 key strokes.

-Make sure that you program a Macro on a spare key that you don’t use in any mode.

-Once you program a Macro on a specific key, the sequence will work regardless of the mode (TV, VCR, SAT, DVD and AMP) you are using.

-To avoid accidental recordings with the ONE FOR ALL 5, you must press the Record key twice to begin recording. Because of this, you cannot assign a Macro or Shifted Macro to the Record key.

-If you had to hold down a key for a few seconds on the original remote control to get a function, this function may not work in a macro on your ONE FOR ALL remote.

-If you program a Macro on a key, the original function will become shifted (excluding CH+/- and VOL+/- keys). Press M (MAGIC) key then the key to access it. If you place a Macro shifted on a digit key, access the original function by pressing the M (MAGIC) key twice and then the digit key.

-If a Shifted Macro is placed on the Channel and Volume keys then the Colour and Brightness feature will be sacrificed.

WWW.ONEFORALL.COM 13