One for All URC-7955, URC-7950, 704918 Search Method, Example To search for your TV code

The Search Method

If your device does not respond to the ONE FOR ALL 5 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL 5. The Search Method may also work if your brand is not listed at all.

Example: To search for your TV code:

1Switch your television on (not on standby) and aim your ONE FOR ALL at your TV.

2	Press the TV key on your ONE FOR ALL 5.
3	Press and hold down the M (MAGIC) key
	until the red LED underneath the POWER key
	blinks twice (the red LED will blink once	x2
	then twice).

4 Press 9 9 1. The red LED will blink twice.

5	Next, press POWER.
6	Aim the ONE FOR ALL 5 at your Television. Now press CH+
	over and over, until your Television turns off (everytime
	you press the CH+ key the ONE FOR ALL 5 will send out a
	POWER signal from the next code contained in the
	memory). You may have to press this key many times (up
	to 150 times) so please be patient. If you skip past a code,
	you can go to the previous code(s) by pressing the CH-
	key. Remember to keep pointing the ONE FOR ALL 5 at
	your Television while pressing this key.
7	As soon as your television turns off, press the M (MAGIC)
	key to store the code.

Important notes:

-Most TV’s do not switch on pressing the POWER key. Please try pressing a “number” key or the “TV-text off” key to switch your TV back on.

-To search for the code for another device follow the instructions above only press the appropriate device key instead of TV during step 2.

-If your Video’s original remote control does not have a POWER key, press PLAY instead of POWER during step 5.

6 WWW.ON EFORALL.CO M