One for All 704918, URC-7955, URC-7950 instruction manual Learning Feature

The Learning Feature

(How to copy functions from your original working remote

onto the ONE FOR ALL5)

Before you start:

-Make sure your original remote control is working correctly.

-Make sure neither your ONE FOR ALL, nor your original remote control is pointing at your device.

Example: To copy the “mono/stereo” function from your original TV remote onto the ”Red”key of your ONE FOR ALL 5.

1Place both remote controls (the ONE FOR ALL 5 and your original) on a flat surface. Make sure the ends which you normally point at your device are facing each other. Keep the remotes at a distance of 2 to 5 cm.

2	Press and hold down the M (MAGIC) key
	until the red LED underneath the POWER key

blinks twice (the red LED will blink once	x2
then twice).

3 Press 9 7 5 (the red LED will blink twice).

4	Press the device key (on the ONE FOR ALL remote) to
	select the mode to which you want to copy the learned
	function (Example: TV key).
5	Press the key (on the ONE FOR ALL remote)
	where you want to place the learned function
	(Example: ”Red” key). The red LED will
	flash rapidly.

6Press and hold the key (on your original remote) that you want to copy until the red LED blinks twice

(Example: “mono/stereo” key).

7If you want to copy other functions within the same mode, simply repeat steps 5 and 6 pressing the next key you want to copy by learning.

8	To exit the learning mode, press and hold down
	the M (MAGIC) key until the red LED blinks twice.

9Learning is mode specific. To access your learned function, press the appropriate device key first.

Important notes:

-The ONE FOR ALL 5 can learn approximately 25 – 40 functions.

-You can replace a learned function by placing another learned function on top.

-Upon changing the batteries, your learned functions will be retained.

8 WWW.ON EFORALL.CO M