One for All URC 6800 manual Setup Codes For TV/VCR Combos, Setup Codes for DVD Players

	TV/VCR Combo.
	NOTE: If you have tried all the codes listed for your
	brand and your TV/VCR Combo does not respond,
	try using the search method found on page 21.
5.	Your Cinema 6+ is now programmed to operate your
	TV/VCR Combo. Write your TV/VCR Combo code in
	the boxes to the left for future reference.

Remember, to use your Cinema 6+ to operate your TV/VCR Combo, press the VCR key first.

Setup Codes For TV/VCR Combos

American High	0035*
Brocksonic	0002, 0294, 0479
Colt	0072
Curtis Mathes	0035*
Daewoo	0278*
Emerson	0002, 0294, 0479
Funai	0000
GE	0035*, 0060*, 0048*, 0240
Hitachi	0035*, 0000
HQ	0000
Lloyds	0000
Magnavox	0000, 0035*, 0081*
Magnin	0240
Memorex	0037, 0162*
MGA	0240
Mitsubishi	0048*
Orion	0002, 0294, 0479
Panasonic	0035*, 0162*
Penney’s	0035*, 0240, 0162*
Quasar	0035*, 0162*
RCA	0035*, 0060*, 0048*
Sansui	0000, 0479
Sanyo	0240
Sears	0000, 0037
Sony	0032*
Symphonic	0000
Zenith	0000

NOTE: If your TV/VCR works with one of the above codes highlight- ed with an asterisk (*), you may need to program a separate TV code to control the volume. Check the list of codes below and follow the instructions in the “Programming the Cinema 6+ to Operate Your TV” section to program the supplied TV code.

TV/VCRs working on VCR code 0032 may require

TV code 0000 for volume control.

TV/VCRs working on VCR code 0035 may require

TV code 0051 for volume control.

TV/VCRs working on VCR code 0048 may require

TV code 0093 for volume control.

TV/VCRs working on VCR code 0060 may require

TV code 0047 for volume control.

TV/VCRs working on VCR code 0081 may require

TV code 0054 for volume control.

TV/VCRs working on VCR code 0162 may require

TV code 0250 for volume control.

TV/VCRs working on VCR code 0278 may require

Web Site : http://www.oneforall.com

TV code 0451 for volume control.

Programming the Cinema 6+ to operate your DVD or Laser Disc Player:

Locate the brand name of your DVD or Laser Disc Player in the DVD or Laser Disc Player setup codes (starting on the next page), and write it in the space below.

DVD/LD Player Brand: ______________________

The brands are listed in alphabetical order with the most pop- ular codes listed first. You will use one of these codes to pro- gram your Cinema 6+ to operate your DVD or Laser Disc Player as follows:

1.Turn on your DVD or Laser Disc Player and insert a disc.

2. Press DVD/LD and release. Press and hold SETUP until the Cinema 6+’s red light blinks twice, then release SETUP.

3.Enter the first four-digit DVD or Laser Disc Player

code listed for your brand. If performed correctly, the red light will blink twice when entering the final digit.

4.Aim the Cinema 6+ at your DVD or Laser Disc Player and press POWER. Your

DVD or Laser Disc Player should turn off. If it does not respond, repeat steps 2-4, trying each code list- ed for your brand until you find the one that works.

NOTE: If you have tried all the codes listed for your

brand and your DVD or Laser Disc Player does not respond, try using the search method found on page 21.

5.	Your Cinema 6+ is now programmed to operate your
	DVD or Laser Disc Player. Write your DVD or Laser
	Disc Player code in the boxes to the left for future refer-
	ence.

Remember, to use Cinema 6+ to operate your DVD or Laser Disc Player, press the DVD/LD key first.

Setup Codes for DVD Players

JVC	0558
Kenwood	0534
Magnavox	0503
Mitsubishi	0521
Onkyo	0503
Panasonic	0490
Philips	0539, 0503
Pioneer	0525, 0571
Proscan	0522
RCA	0522
Samsung	0573
Sony	0533
Technics	0490
Toshiba	0503
Yamaha	0490, 0545
Zenith	0503, 0591

Setup Codes for Laser Disc Players

Denon0059

Mitsubishi 0059

NAD0059

Web Site : http://www.oneforall.com

14 15