46 • Batteries User Manual a nd Technica l Guide The O'Neil microF lash Series of Printers
microFlash3 Battery Power
To determine the current charge on the battery pack, you can print out a
self test by pressing and holding the red self-test button on the side of the
printer for four seconds. If the battery is good, you will see the word
“GOOD” next to the Batter y voltage p rint out.
The microFlash3 printer has a built in low battery detector. When your
printer's battery volta ge is low , the printer will bee p three times ,
indicating a Low Battery Warning.
The microFlash3 will charge in approximately four hours.
microFlash2t/2tcr/2i/2icr Battery Power
To determine the current charge on the battery pack, print out a self test
by pressing and holding the red self-test button for four seconds. If the
battery is good, you will see the abbreviation for the word “GOOD” next
to the Batter y voltage p rint out.
The microFlash printer has a built in low battery detector. When the
printer's battery volta ge is low , the printer will bee p three times ,
indicating a Low Battery Warning. This will only happen however, if the
printer is awake.
The microFlash2t/2tcr/2i/2icr is charged in approximately six to nine
hours.
microFlash4t/4tcr Battery Power
To determine the current charge on the battery pack, print out a self test
by pressing and holding the red self-test button for four seconds. If the
battery is good, you will see the abbreviation for the word “GOOD” next
to the Batter y voltage p rint out. T he 4t/4tcr c an use two ba tteries
(VBATT1 and VBATT2).
The microFlash printer has a built in low battery detector. When the
printer's battery volta ge is low , the printer will bee p three times ,
indicating a Low Battery Warning. This will only happen however, if the
printer is awake.
The microFlash4t/4tcr is charged in approximately three hours.
Charging the microFlash with the AC Adapter
1) Plug the AC adapter into a standard wall outlet.
2) Plug the other end into the DC jack on the side of the microFlash
printer. The battery charge light will glow red while the battery is