Enjoying Audio Sources
Turning On the A-9755/A-9555
POWER |
STANDBY |
indicator |
STANDBY |
ON |
Note:
To shut down the 
).
Selecting Speaker
1
Press the [POWER] switch.
The
Notes:
•The 
). When the power cord is connected for the very first time or the [POWER] switch is set to ON
(
) position, the
•When it’s turned on, the
You can select which set of speakers outputs sound. OFF: Select “OFF,” if you do not connect any speaker.
A:To output sound from the speakers connected to the SPEAKERS A terminals, turn the SPEAKERS selector to the “A” position.
B:To output sound from the speakers connected to the SPEAKERS B terminals, turn the SPEAKERS selector to the “B” position.
A+B: To output sound from all connected speakers, turn the SPEAKERS selector to the “A+B” position.
Note:
If the Volume indicator flashes quickly, make sure that the speakers are connected correctly.
2 Remote To set the
button on the remote controller. The STANDBY indicator lights up.
To turn the
press the [ON] button on the remote controller.
The STANDBY indicator goes off.
If the A-9755/A-9555 is connected to other compo-
nents via 
, press the remote controller’s [ON] but- ton once to turn on the
Turning on all system components simultaneously: You can set the 
components are turned on with just one press of the remote controller’s [ON] button. To do this, turn on the
If you want to restore the setting to the original state, reset the
14
