Onkyo A-9755, 9555 Supplied Accessories, Connecting the Supplied Power Cord, Notes

Supplied Accessories

Make sure you have the following accessories:

Remote controller & two batteries (AA/R6)

A-9755: RC-636S

A-9555: RC-627S

Power cord

(Power cord varies from country to country)

In catalogs and on packaging, the letter added to the end of the product name indicates the color of the A-9755/A-9555. Specifications and operation are the same regardless of color.

Connecting the Supplied Power Cord

Plug the supplied power cord into this AC INLET.

•Do not use a power cord other than the one supplied with the A-9755/A-9555. The power cord supplied is designed for use with the A-9755/A-9555 and should not be used with any other device.

•Never have the power cord disconnected from the A-9755/A-9555 while the other end is plugged into the wall outlet. Doing so may cause an electric shock. Always connect by plugging into the wall outlet last and disconnect by unplugging from the wall outlet first.

Installing the Remote Controller’s Batteries

1 To open the battery compartment, press the small hollow and slide open the cover.

2 Insert the two supplied batteries (AA/R6) in accordance with the polarity diagram inside the battery compartment.

3 Slide the cover shut.

Notes:

•If the remote controller doesn’t work reliably, try replacing the batteries.

•Don’t mix new and old batteries or different types of batteries.

•If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.

•Flat batteries should be removed as soon as possible to prevent damage from leakage or corrosion.

DO NOT connect the power cord at this time.

To wall outlet

5