Onkyo Connecting Components, Connecting the Power Cord, Connecting the A-933-Continued

*En_A933_02.fm Page 16 Tuesday, January 25, 2005 1:46 PM

Connecting the A-933—Continued

Connecting Components

With (Remote Interactive), you can control your -compatible Onkyo CD player, Tuner, and so on

with the A-933’s remote controller.

•To use , you must make an analog audio con- nection between the A-933 and each audio compo- nent.

Tuner (T-433) etc.

A-933 (Preamp)

Connecting the Power Cord

•Before connecting the power cord, connect all your speakers and audio components.

•Turning on the A-933 may cause a momentary power surge, which might interfere with other electrical equipment on the same circuit. If this is a problem, plug the A-933 into a different branch circuit.

To wall outlet

CD Player (C-733) etc.

Notes:

•Push each plug in all the way to make a good connec- tion.

•Use only dedicated cables for connections.

(No cables are supplied with the A-933.)

•The A-933 has four jacks. They’re all the same, so you can use any of them.

• jacks should be connected to only Onkyo compo- nents. Connecting them to another manufacturer’s component may cause it to malfunction.

•Some components may not support all functions. See the manuals supplied with your other Onkyo components for more information.

16