Onkyo A-933 instruction manual Remote Controller RC-613S-Continued, Using the Remote Controller

*En_A933_02.fm Page 9 Tuesday, January 25, 2005 1:46 PM

Remote Controller (RC-613S)—Continued

Q Previous & Next [ ]/[ ] (PRESET [ ] [ ]) buttons

These buttons are used to select the previous or next track on an Onkyo Separate Collection CD, MD, cassette, or CDR component that’s connected via . Pressing them repeatedly selects earlier or later tracks. On an Onkyo Separate Collection tuner, they’re used to select radio presets.

RSLEEP button

This button is used to set the sleep function on an Onkyo Separate Collection tuner that’s connected

via .

S INPUT [ ]/[ ] buttons (17)

These buttons are used to select from the following input sources: PHONO, TUNER, CD, LINE, MD, or TAPE/CDR.

TREPEAT button

This button is used to set the repeat playback func- tions on an Onkyo Separate Collection CD, MD, or

CDR component that’s connected via .

UDISPLAY button

This button is used to change the information shown on the display.

VSCROLL button

This button is used to scroll text displayed on an Onkyo Separate Collection MD or CDR component

that’s connected via .

WCLOCK CALL button

This button is used to display the time on an Onkyo

Separate Collection tuner that’s connected via .

Notes:

•The supplied batteries should last for about six months, although this will vary with usage.

•If the remote controller doesn’t work reliably, try replacing the batteries.

•Don’t mix new and old batteries or different types of batteries.

•If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.

•Expired batteries should be removed as soon as possi- ble to prevent damage from leakage or corrosion.

Using the Remote Controller

Point the remote controller toward the remote control sensor.

Remote control sensor

About 5 m (16 feet)

Notes:

Installing the Batteries

Remove the battery compartment cover, as shown.

Insert the two supplied batteries (AA/R6) in accordance with the polarity markings in the battery compart- ment.

•The remote controller may not work reliably if the A-933 is subjected to bright light, such as direct sun- light or inverter-type fluorescent lights. Keep this in mind when installing.

•If another remote controller of the same type is used in the same room, or the A-933 is installed close to equipment that uses infrared rays, the remote control- ler may not work reliably.

•Don’t put anything, such as a book, on the remote con- troller, because the buttons may be pressed inadvert- ently, thereby draining the batteries.

•The remote controller may not work reliably if the A-933 is installed in a rack behind colored glass doors. Keep this in mind when installing.

•The remote controller will not work if there’s an obsta- cle between it and the A-933’s remote control sensor.

Replace the battery compartment cover.

9