FUNCTION SETUP

Setting items

 

 

 

 

Options

 

Network Connection

Enable(Custom)

 

IP Address

Auto(DHCP)*

Set the IP address.

 

 

 

 

Setting

 

 

 

In most cases, you can connect

 

 

 

 

Manual

 

IP Address

 

 

 

 

 

 

 

 

to the Internet without making

 

 

 

 

 

 

 

Subnet

 

 

 

 

 

 

 

any changes to the default

 

 

 

 

 

 

 

Mask

 

 

 

 

 

 

 

setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Default

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gateway

 

 

 

 

 

 

 

 

 

 

 

 

 

DNS Setting

Auto(DHCP)

*

Set the DNS setting.

 

 

 

 

 

 

 

 

In most cases, you can connect

 

 

 

 

 

Manual

 

Primary

 

 

 

 

 

 

 

DNS

to the Internet without making

 

 

 

 

 

 

 

 

any changes to the default

 

 

 

 

 

 

 

Secondary

 

 

 

 

 

 

 

DNS

setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Proxy

Do Not Use*

Set the proxy server.

 

 

 

 

Setting

 

 

 

In most cases, you can connect

 

 

 

 

Use

 

Proxy

 

 

 

 

 

 

 

Address

to the Internet without using

 

 

 

 

 

 

 

 

proxy server.

 

 

 

 

 

 

 

Proxy Port

 

 

 

 

Connection

Auto*

 

 

Set the connection speed.

 

 

 

 

Speed

 

In most cases, you can connect

 

 

 

 

10BASE Half

 

 

 

 

 

 

 

 

to the Internet without making

 

 

 

 

 

10BASE Full

 

 

 

 

 

any changes to the default

 

 

 

 

 

100BASE Half

 

 

 

 

 

setting.

 

 

 

 

 

100BASE Full

 

 

 

 

 

BD-Live

Allow*

 

 

You can restrict Internet access

 

 

 

 

Setting

 

Limited Allow when BD-Live

 

 

 

 

Limited Allow

 

 

 

 

 

 

 

 

functions are used.

 

 

 

 

 

Prohibit

 

 

 

 

 

 

 

 

 

 

MAC Address

 

 

 

You can check the MAC address.

 

 

Disable

 

 

 

 

 

Deactivate the network

 

 

 

 

 

 

 

 

connection.

 

 

Power On

 

Enable

 

 

 

Set to “Enable” to switch on /

 

 

Control

 

 

 

 

 

standby mode from the

 

 

 

Disable*

 

 

 

 

 

 

 

 

 

 

 

connected external device with

 

 

 

 

 

 

 

 

a LAN cable.

 

 

 

 

 

 

 

 

When set to “Enable”, the power

 

 

 

 

 

 

 

 

consumption could reach a

 

 

 

 

 

 

 

 

maximum of 7W.

Software Update

Current Version :

 

 

 

 

 

 

Allows you to update this unit’s

Indicates the current firmware version.

 

 

 

firmware.

 

 

 

 

 

 

 

 

Disc Update :

 

 

 

 

 

Refer to page 54.

You can update the software by using a disc.

 

 

 

Network Update :

 

 

 

 

 

 

 

You can update the firmware version by connecting this unit to the Internet.

*) Settings with (*) are the default.

•HDMI CEC allows integrated system control over HDMI and is part of the HDMI standard.

In addition to Onkyo AV components, it allows interoperability with CEC-compatible AV components and TVs made by other manufacturers.

•When “HDMI CEC” setting is set to “On”, functions listed below will be available.

Direct Change

When this unit is turned on, the TV is also turned on and the appropriate external input channel will be selected automatically. The appropriate external input channel can also be selected on your TV automatically when you press [B (play)] when the unit’s power is on.

Standby

When you press and hold [I /QON/STANDBY] on the front panel for 2 seconds, it turns off the power of the TV first and then turns off the power of this unit also.

System Information

Get & Set Menu Language

•The unit recognises the OSD language set for the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit.

•This feature is available only when “Auto(XXXX)” is selected in “Player Menu” in the setup menu. (Refer to “Player Menu” on page 41.)

Note

•HDMI CEC is available only when the display device is connected by an HDMI cable, and when it supports HDMI CEC feature.

50

EN