FUNCTION SETUP

3-a) Use [K / L] to select “Proxy Address”, then press [ENTER]. Proxy address setting screen will appear. Enter proxy address.

•The keyboard screen will appear.

Others

Proxy Address

Clear

All Clear

OK

[K / L / s / B] : Move the highlight.

[the Number buttons] : Enter number.

[ENTER] : Enter the highlighted number/word.

[A] : Clear the entered number or word.

[B] : Clear all the entered numbers or words.

[C] : Switch between abc ? ABC ? @!?

[D] : Set the entered number or word.

3-b) After you enter proxy address correctly, press [D].

•Confirmation message will appear. Select “Yes” to complete the settings.

Others

Proxy Address

Is Setting OK?

xxxxx

No

Yes

3-c) Use [K / L] to select “Proxy Port”, then press [ENTER]. Proxy port setting screen will appear. Enter proxy port number with number buttons.

Others

Proxy Port

Please select the input Proxy Port.

then press ‘ENTER’.

xxxxx

3-d) After you enter proxy port correctly, press [ENTER].

4Press [RETURN] to go back to the previous screen, or press [SETUP] to exit.

Note

•The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than 65535, it will be regarded as 65535.)

•For proxy port, the selected ports may be blocked and not be able to use depending on your network environment.

•Connection Speed

You can set connection speed as your preference. (The default setting is “Auto”.)

1Follow steps 1 to 4 in “Connection Test” on page 51.

2Use [K / L] to select “Enable(Custom)”, then press [ENTER].

3Use [K / L] to select “Connection Speed”, then press [ENTER].

4Use [K / L] to select the desired setting, then press [ENTER].

“Auto”:

Set the appropriate connection speed automatically, in accordance with your network environment.

“10BASE Half”:

Set the connection speed to “10BASE Half”.

“10BASE Full”:

Set the connection speed to “10BASE Full”.

“100BASE Half”:

Set the connection speed to “100BASE Half”.

“100BASE Full”:

Set the connection speed to “100BASE Full”.

5Press [RETURN] to go back to the previous screen, or press [SETUP] to exit.

Note

•Choose a connection speed in accordance with your network environment.

•The network connection may be disabled depending on the device, when the settings are changed.

•BD-Live Setting

You can limit the Internet access from the BD-Livefunctions. (The default setting is “Allow”.)

1Follow steps 1 to 4 in “Connection Test” on page 51.

2Use [K / L] to select “Enable(Custom)”, then press [ENTER].

3Use [K / L] to select “BD-Live Setting”, then press [ENTER].

4Use [K / L] to select the desired setting, then press [ENTER].

“Allow”:

Internet access is permitted from all BD-Livecontents.

“Limited Allow”:

Internet access is permitted only for BD-Livecontents which have content owner certificates. Internet access without the certificates are prohibited.

“Prohibit”:

Internet access is prohibited from all BD-Livecontents.

5Press [RETURN] to go back to the previous screen, or press [SETUP] to exit.

EN

53