Messages during recording (continued)
Display | Cause | Remedy |
CD Dub Fail | CD dubbing cannot be performed because | Select "Digital In 1" for the input source. |
| "Digital In 1" is not selected for the input source. |
|
| CD dubbing cannot be performed because | Cancel the recording or recording standby state on |
| the connected component (Onkyo separate | the connected component. |
| collection's cassette deck or MD recorder) |
|
| is in the recording or recording standby state. |
|
| CD dubbing cannot be performed because | Make sure that proper connections is made for |
| the components are not properly connected. | the zcable, audio connection cables, and optical |
|
| digital cable. |
|
|
|
Cannot Rec | Recording cannot be performed because | Replace it with a |
| a finalized |
|
|
|
|
| Recording cannot be performed because | Replace it with a |
| a finalized | recording after unfinalizing it. |
|
|
|
Messages during playback, name input, and other situations
Display | Cause | Remedy | ||
Blank Disc | You have tried to play a disc that has | If the inserted disc is a | ||
| no recordings on it. | with no recordings, you may record onto it, | ||
|
|
| but it cannot be played. | |
|
|
| ||
No Disc | No disc has been inserted. | Open the disc tray and make sure that a | ||
|
|
| disc is inserted. | |
Name Full | Entering name information exceeding the | You can enter up to 1000 characters per disc | ||
| limitation of 1000 characters per disc was | (see page 34). | ||
| attempted. |
|
| |
Full | Entering a name exceeding the limitation of | You can enter up to 24 characters per name | ||
| 24 characters per name was attempted. | (see page 34). | ||
|
|
| ||
Memory Full | Programming more than 32 tracks was | You can program up to 32 tracks. | ||
| attempted. |
|
| |
|
|
|
|
|
Cannot Edit | • | Editing of a CD or finalized |
|
|
| • | Editing of a finalized | • | Exit the memory or random playback mode. |
|
| in the memory or random playback mode. |
|
|
| • | Editing of the name of a finalized | • | To edit the disc name, first unfinalize the disc. |
|
| attempted using the remote controller. |
|
|
|
|
| ||
DAO Disc | Unfinalizing a disc recorded with the DAO | Unfinalization cannot be performed using the CDR- | ||
| method (*2) using a computer was attempted. | 201A. | ||
Not Audio | A signal that cannot be recorded is being input. | Input only recordable audio signals (see page 18). | ||
Data Disc | One or more data tracks exist on the disc. | Insert a disc that is suitable for recording. | ||
|
|
| ||
PCA Full | Since no PCA (*3) remains, no more tracks can | Insert a disc that is suitable for recording. | ||
| be added. |
|
| |
|
|
| ||
PMA Full | Since no PMA remains, no more tracks can be | Insert a disc that is suitable for recording. | ||
| added. |
|
| |
|
|
|
|
|
*1 OPC (Optimum Power Control)/*3 PCA (Power Calibration Area)
If an unfinalized disc is inserted into the
*2 DAO (Disc At Once)
One type of recording method. Additional tracks cannot be added when this method is used.
Information Other
49