Synchronous recording by input signal detection (Signal synchronous recording)

4 Adjust the recording level.

Refer to page 24, step 4 "Adjust the recording level."

5 Stop the playback of the recording source.

6 Press the oREC button (or the remote controller REC obutton)

The CDR-201A enters the input standby state, "Signal Rec" appears in the display, and then "Signal Wait" appears flashing alternately with the time display.

CDR-201A RC-448C

RECREC

7 Verify that "Signal Wait" is flashing together with the time display and then start the playback of the recording source.

Recording starts as soon as the CDR-201A receives signals from the recording source.

Notes on the signal synchronous recording

•When the level synch function is turned on during analog recording, the track numbers are updated automatically as soon as audible sound is detected after 2 seconds or more of silence.

•If “Signal Wait” continues for 1 minute, signal synchronous recording is cancelled and playback is stopped.

•When "D.In Unlock" appears in the front display during the signal synchronous recording (digital input), the CDR-201A cancels the recording mode and enter to the recording standby state.

30