Onkyo CNP-1000 instruction manual Selecting XM Radio Channels, En-3

TX-SR705_XM_EnFrEs.book Page 3 Wednesday, May 30, 2007 5:20 PM

Selecting XM Radio Channels

There are three ways to select XM radio channels:

•Channel Search mode: select any channel.

•Category Search mode: select channels by category.

•Direct tuning: enter channel number.

Note:

You cannot select Channel Search or Category Search

mode while the Tuning Arrow indicators are flashing, as tuning is in progress.

Number buttons

D.TUN

RECEIVER

ENTER

■ Category Search Mode

1		Press the [RECEIVER] button,
		followed by the [ENTER] button
		to select “Category Search”
		mode.
	ENTER
2		Use the Left and Right [	]/[	]
		buttons to select a category, and
		use the Up and Down [	]/[	]
	ENTER	buttons to select a channel in

that category.

■Direct Tuning

You can select an XM radio channel directly by entering its number.

1	Press the [RECEIVER] button,
	followed by the [D. TUN] button.
	The [RECEIVER] button flashes.

■Channel Search Mode

1Press the [RECEIVER] button, followed by the [ENTER] button

	to select “Channel Search”
	mode.
	ENTER
2	Use the Up and Down [ ]/[ ]
	buttons to select a channel.

ENTER

Channel number Channel name

You can also use the Left and Right

[]/[ ] buttons to select a category.

2

DVD VCR/DVR CBL/SAT

1 2 3

GAME/TV AUX MULTI CH

4 5 6

TAPE TUNER CD

7 8 9

D. TUN

0 CLEAR

11 12

Within 8 seconds, use the num- ber buttons to enter the channel number.

The channel is selected.

For example, to select channel #20, press 0, 2, 0, or 2, 0, [ENTER].

Note:

While the [RECEIVER] button is flash- ing, the input source cannot be changed by using the remote controller.

En-3