Onkyo CNP-1000 Setting the Satellite Radio Mode, En-2, Selecting XM Satellite Radio, Notes

TX-SR705_XM_EnFrEs.book Page 2 Wednesday, May 30, 2007 5:20 PM

SETUP 5 Press the [SETUP] button.

The setup menu closes.

TUNER ENTER

Setting the Satellite Radio Mode

Before you can listen to XM Satellite Radio, you must set the Satellite Radio mode to XM.

1	On the AV receiver, press the
	[SETUP] button.
	The main menu appears onscreen.
2	Use the Up and Down [ ]/[ ]

buttons to select “7. Hardware Setup,” and then press [ENTER]. The Hardware Setup menu appears.

7. Hardware Setup

1. Remote Control

2.Zone2

3.Tuner

4. Analog Multich

5. HDMI

3	Use the Up and Down [ ]/[ ]
	buttons to select “3. Tuner,” and
	then press [ENTER].
	The Tuner menu appears.
	7–3. Tuner
	Satellite Radio	None

4	Use the Left and Right [	]/[	]
	buttons to select “XM.”
	Pressing the Left and Right [	]/[	]

buttons cycles through the following SAT options: None → XM → SIRIUS

→XM/SIRIUS

None: Select if you’re not using Satellite Radio.

XM: Select to use XM Satellite Radio.

SIRIUS: Select to use SIRIUS Satel- lite Radio.

XM/SIRIUS: Select to use XM Satel- lite Radio and SIRIUS Sat- ellite Radio.

En-2

Selecting XM Satellite Radio

1	Press the [TUNER] input selector
	button repeatedly to select XM.
	If “CHECK XM TUNER” appears on
	the display, make sure the XM Mini-
	Tuner is connected properly.

Signing Up for XM Satellite Radio

Once you have installed the XM Mini-Tuner and Home Dock, you are ready to subscribe to XM Satellite Radio. You’ll need a major credit card and your XM Radio ID. There are three places you can find your 8-character XM Radio ID:

1. On the XM Mini-Tuner

2. On the XM Mini-Tuner packaging

3. On XM Channel 0, as explained below

1	Use the TUNING Up and Down
	[ ]/[ ] buttons to select RADIO
	ID.
	Your XM Radio ID number is dis-
	played. Write it below for reference.
		ID
2	To sign up, go to:
	http://activate.xmradio.com
	Or call: 1-800-967-2346
	For XM Canada, go to:
	http://xmradio.ca
	Or call: 1-877-438-9677

Notes:

•RADIO ID cannot be selected in Category Search mode. You must select Channel Search mode (see page 3).

•The following letters are not used in XM Satellite Radio IDs: I, O, S, F.

•XM Satellite Radio will transmit a special signal to your AV receiver to activate the full channel lineup. Activation normally takes between 10 and 15 minutes, but during busy peak periods, you may need to leave the AV receiver turned on for up to an hour.