Using the Radio—Continued

Deleting Presets

You can delete unwanted presets as follows.

1 Select the preset that you want to delete.

2 Press the [MODE] button and use the [ ]/ [ ] buttons to display “Preset Edit.”

3 Press the [ENTER] button.

4 Use the [ ]/[ ] buttons to display “Pre- set Erase?.”

6 While the preset number is flashing, use the [ ]/[ ] buttons to select a preset number from 1 to 40.

7 Press the [ENTER] button.

The station is copied to another channel and the preset number stops flashing.

Using the buttons on the CR-505DAB:

1.Select the preset that you want to copy.

2.Press the [MENU] button and turn the [ / ] control until “Preset Edit” appears on the display.

3.Push the [ / ] control.

4.Turn the [ / ] control until “Preset Copy?” appears on the display.

5.Push the [ / ] control.

6.While the preset number is flashing, use the [ / ] control to select a preset number from 1 to 40.

7.Push the [ / ] control.

5 Press the [ENTER] button.

The selected preset is deleted and its number disap- pears from the display.

Using the buttons on the CR-505DAB:

1.Select the preset that you want to delete.

2.Press the [MENU] button and turn the [ / ] control until “Preset Edit” appears on the display.

3.Push the [ / ] control.

4.Turn the [ / ] control until “Preset Erase?” appears on the display.

5.Push the [ / ] control.

Copying Preset Channels

You can copy a preset channel to another channel.

1 Select the preset that you want to copy.

2 Press the [MODE] button and use the [ ]/ [ ] buttons to display “Preset Edit.”

3 Press the [ENTER] button.

4 Use the [ ]/[ ] buttons to display “Pre- set Copy?.”

5 Press the [ENTER] button.

The preset number flashes.

RDS (Radio Data System)

The Radio Data System (RDS) allows FM radio stations to broadcast various information to RDS-compatible radios, including the name of the radio station and information about the program being broadcast. Many FM stations in most European countries transmit RDS information.

The CR-505DAB supports the following RDS information: PS: Program Service Name

When tuned into a station that transmits PS information, the station’s name appears on the display.

RT: Radio Text

When tuned into a station that transmits RT information, any text messages received appear on the display.

When the CR-505DAB is tuned into a station that’s trans- mitting RDS information, the RDS indicator appears on the display.

To display the PS and RT information, press the [DIS- PLAY] button repeatedly to select Frequency display, PS, or RT, as shown.

Frequency

PS (Program Service Name)

RT (Radio Text)

When the CR-505DAB receives RT information, “Please wait” appears on the display first, and then the received text scrolls across the display.

30

Page 30
Image 30
Onkyo CR-505DA instruction manual Deleting Presets, RDS Radio Data System