44
Initial Settings menu
The Initial Settings menu gives you complete control in
setting up your DVD player, including audio, and video
output settings, audience limitation settings, among oth-
ers.
If an option is grayed out it means that it cannot be
changed at the current time. This is usually because a
disc is playing. Stop the disc, then change the setting.
Note:
• The language options shown in the onscreen display
illustrations on the following pages may not corre-
spond to those available in your country or region.
Digital Out
You only need to make this setting if you connected this
player to an AV receiver (or other component) using one
of the digital outputs.
■
Default setting: On
If at any time you need to switch off the digital audio
output, set this to “Off”, otherwise leave it “On”.
Note that you can’t switch on/off the optical and coaxial
outputs individually.
Dolby Digital Out
You only need to make this setting if you connected this
player to an AV receiver (or other component) using one
of the digital outputs.
■
Default setting: Dolby Digital
If your AV receiver (or other connected component) is
Dolby Digital compatible, set to “Dolby Digital”, other-
wise set to “Dolby Digital > PCM”.
DTS Out
You only need to make this setting if you connected this
player to an AV receiver (or other component) using one
of the digital outputs.
■
Default setting: DTS
If your AV receiver (or other connected component) has
a built-in DTS decoder, set this to “DTS”, otherwise set
to “Off”. Check the manual that came with the other
component if you’re unsure whether it is DTS compati-
ble.
Note:
• If you set to DTS with a non-DTS compatible ampli-
fier, noise will be output when you play a DTS disc.
96kHz PCM Out
You only need to make this setting if you connected this
player to an AV receiver (or other component) using one
of the digital outputs.
■
Default setting: 96 kHz > 48kHz
If your AV receiver (or other connected component) is
compatible with high sampling rates (96 kHz), set this to
“96 kHz,” otherwise set it to “96 kHz > 48 kHz” (96 kHz
audio is converted to a more compatible 48 kHz). Check
the manual that came with the other component if you’re
unsure whether it is 96 kHz compatible.
Using the Initial Settings menu
1
While playback is stopped, press
Setup and select “Initial Settings”
from the on-screen display.
2
Select the setup category from the
list on the left, then select an item
from the menu list to the right.
3
Make the setting you want.
Digital Audio Out settings
Setup
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
Video Adjust
HOME MENU
DVD
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
On
Off
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
Dolby Digital
Dolby Digital > PCM
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
DTS
Off
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
96 kHz > 48kHz
96 kHz
Initial Settings
DPS-5.5_En.book Page44 Monday,May17, 2004 4:45 PM