Onkyo DR-2000 Listening to the Radio, Tuning Manually, Presetting Radio Stations

Listening to the Radio

There are two ways to select radio stations:

•Manual tuning

•Presetting radio stations then selecting the preset channels

Tuning Manually

			DVD/CD VIDEO 1 VIDEO 2 TV/LINE TAPE/MD		FM	AM		VOLUME
STANDBY/ON							INPUT
ON
STANDBY
POWER			SURROUND	STEREO	Theater-Dimensional			ACOUSTIC
								CONTROL
ON OFF			TUNER PRESET
	SPEAKER A/B SUBWOOFER	TEST TONE DISTANCE	CH SEL Theater-Dimensional DOWN UP	FM MODE PRESET MEORY			TUNING	DISPLAY SPEAKER SETUP
PHONES	MODE		SETUP

Press the		ON OFF	FM MODE	2	1
lower part of			The corresponding indicator is lit
the cover to
			while the input source is FM or AM.
open.
		ON OFF
		PHONES
1	Unit	Turn INPUT to select the band (FM
	INPUT	or AM).

e.g. When FM is selected.

ch

Note

You can also select the band with the remote controller. See next page.

2 Unit only Press TUNING / to select the frequency.

Appears when a broadcast is received.

TUNING

ch

•The frequency changes in 50 kHz steps

in FM and 9 kHz in AM each time you press TUNING /.

•In FM, if either of the buttons is held continuously for more than 0.5 seconds during manual tuning, the frequencies are scanned automatically –– FM auto tuning mode. When a broadcast is received, scanning stops.

Tuning in a weak frequency (only for FM stations)

When you tune in a stereo FM station, the FM ST indicator lights up if the signal is sufficiently strong.

FM MUTE

FM ST

If the signal is weak, you may not be able to tune to the station. In this case, press FM MODE. The FM MUTE indicator goes off. Then select the station to which you want to listen.

(At this time, the station will be in mono and interstation noise will be heard.)

Unit Only

FM MODE

Presetting Radio Stations

You can preset up to 30 stations.

				DVD/CD VIDEO 1 VIDEO 2 TV/LINE TAPE/MD FM AM		VOLUME
STANDBY/ON					INPUT
ON
STANDBY
POWER					SURROUND STEREO Theater-Dimensional	ACOUSTIC
						CONTROL
ON OFF				TUNER PRESET
		SPEAKER A/B SUBWOOFER	TEST TONE DISTANCE	CH SEL Theater-Dimensional	DOWN UPFM MODE PRESET MEORY TUNING	DISPLAY SPEAKER SETUP
	PHONES	MODE		SETUP
				3	2,4
1			Tune in the radio station you wish
			to preset (see steps in the left
			column of this page).
2	Unit only		Press PRESET MEMORY.
			The MEMORY indicator lights and the
PRESET MEORY			preset number starts flashing in the display.
						MEMORY
						ch
3			While the MEMORY indicator is lit
			(for about 8 seconds), press TUNER
			PRESET	/	to select the preset
TUNER PRESET			number.
						MEMORY
						ch
4			Press PRESET MEMORY.
			The radio station is registered to the

PRESET MEORY

preset channel.

To register another preset station, repeat steps 1 to 4.

28