Onkyo DV-CP500 Making Connections, Optional Video Connections, Making S-video connections

Making Connections

Optional Video Connections

Visible improvements in DVD-Video quality can be achieved by making either S-video or component video connections to a TV or monitor compatible with these types of connections.

Note

When either an S-video or component video connection is made, it is not necessary to make composite video connections using the yellow cord of the audio-video cable.

Be sure to set TV Aspect after connection using the setup menu explained in “Customizing the Settings” starting on page 30.

Making S-video connections

If the TV or monitor has an S-video input, making this type of video connection will produce improved picture quality. Using an S-video cable, connect the VIDEO OUTPUT S VIDEO jack to the corresponding S-video input jack on the TV.

To S-video inputs

S-video cable (not supplied)

VIDEO OUTPUT

COMPONENT
	AUDIO	DIGITAL OUTPUT
PR	OUTPUT
VIDEO		COAXIAL OPTICAL	DVD CHANGER
			MODEL NO. DV-CP500
PB	L
Y	R
S VIDEO

To component video inputs

	Making component video connections	Component video cable (not supplied)
If the TV or monitor has component video inputs, making this type		PR
of video connection will produce ideal picture quality for the
presentation of DVD-Video. Using a component video cable (sold		PB
separately), connect the VIDEO OUTPUT COMPONENT jacks to
the corresponding component video input jacks on the TV.		Y
Actual labels for component video inputs may vary depending on
the TV manufacturer. (e.g., Y, R-Y, B-Y or Y, CB, CR)
In some TVs or monitors, the color levels of the playback picture
may be reduced slightly or the tint may change. In such a case,
adjust the TV or monitor for optimum performance.
To view Progressive scan video, you need a TV with Progressive
scan capability. Please check TV owner’s manual to confirm that it
is compatible.

Connect the power cord after all connections are complete.

Component signal

S-video signal

Signal flow

15