DVD VCD CD

Basic Playback

Before playing

DVD-Video, Video CD, CD can be played with the DVD Changer (see “Playable Discs” on page 6). Do not play anything else.

When playing DVD-Video or Video CD with video features, turn on the TV and set the TV to the DVD Changer's input.

If an audio system is connected to the DVD Changer, turn on the audio system and set it to the DVD Changer’s input.

About the DVD , VCD and CD marks in the pages related to disc operation

DVD means the function or title is related to DVD-Video operation.

VCD means the function or title is related to Video CD operation.

CD means the function or title is related to audio CD operation.

Warning

If the DVD Changer is connected to the TV or amplifier through the analog audio jacks, do not play DTS-encoded discs. Excessive noise may be output from the analog stereo jacks, which may damage the connected equipment.

To reproduce DTS surround sounds, digital connection to an amplifier with a DTS decoder is needed.

Starting Playback

Disc tray

1 Press 0 OPEN/CLOSE.

The disc tray opens.

If the DVD Changer is in standby mode when

0OPEN/CLOSE button is pressed

The DVD Changer turns on and the disc tray opens. In this case, it takes several seconds until the disc tray opens.

2 Place a disc on the disc tray.

To insert or remove another disc by changing the tray position, press DISC SKIP.

Put the disc in the tray with the label side facing up.

There are two different disc sizes.

Place the disc in the correct guide on the disc tray.

3 Press PLAY/PAUSE £/8.

The disc tray closes and playback starts.

If you press 0 OPEN/CLOSE to close the tray after step 2, playback may automatically start.

The appropriate disc indicator and the play indicator light.

For the other information that appears in the display, see page 12.

If the DVD Changer is in standby mode when PLAY/PAUSE £/8 button is pressed

The DVD Changer turns on and playback starts. In this case, it takes several seconds until playback starts.

DISC SKIP 4/¢ STOP 7 PLAY/PAUSE £/8 DISC 1-DISC 5

0 OPEN/CLOSE

To stop playback

Press STOP 7.

When you press PLAY/PAUSE £/8 to restart playback, playback starts from the location where you stopped playback because the location index is stored in memory.

Note

The location where playback resumes may vary depending on the disc or the scene where you stopped.

Resuming playback from the beginning

Press STOP 7 again after stopping playback to clear the location index memory, then press PLAY/PAUSE £/8 to start playback.

To select a disc

Press one of DISC 1 to DISC 5 buttons or press DISC SKIP repeatedly.

CAUTION

Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.

18

Page 18
Image 18
Onkyo DV-CP500 instruction manual Basic Playback, Starting Playback, To stop playback, To select a disc, Press Stop