![](/images/new-backgrounds/1146596/146596215x1.webp)
Using the Observer console locally on the GigaStor
Depending on how you want or need to use Observer it can be either a graphic console to help you analyze your network data or it can be a probe to capture data and to which other Observer consoles can connect. Observer cannot simultaneously be a console and a probe.
In some situations you may want to run Observer locally on your GigaStor instead of using a separate system. This is not the default behavior for a GigaStor. This section describes how to stop the probe that runs as a Windows service and launch Observer.
On the local GigaStor system
1
Figure 73 Probe Service Configuration Applet
2The Probe Administration window opens. Click the Probe Options tab (Figure 74).
108
Using the Observer console locally on the GigaStor |
|
Chapter 7 Observer on the GigaStor | rev. 1 |