Digital T1/E1 Probe Settings
To access the probe settings, select the probe,
Probe or Device Settings. Then click the T1/E1 tab (Figure 22).
Figure 22 T1/E1 WAN Probe Settings
Table 2 describes fields in Figure 22.
Table 2 T1/E1 WAN Probe Settings
Setting | Explanation |
WAN/Frame Relay Type | Choose T1 or E1 to match the type of link you are analyzing. |
Encapsulation | You must set this to match the settings on the frame relay CSU/DSU. |
|
|
Subprotocol | If ATM or LAPB is the selected encapsulation method, you must choose the sub- |
| projects on the link. |
|
|
Link 1 and Link 2 Channel Settings (Note that for the link and settings to be activated, you must check the On check box for that link).
Fractionalized | Check if this link is configured for fractionalized operation. |
Channel selector check | Choose the channels you want to be included in the analysis. |
boxes |
|
|
|
Include in Util. | Check if you want to include statistics from this link in the Bandwidth Utilization |
Thermometer. | Thermometer. |
|
|
| Configuring Observer for your WAN device |
rev. 1 | Chapter 2 Installing Your GigaStor |
35
