Onkyo DV-CP704S Connecting the DV-CP704, Connecting Your TV or Projector, Video cable

Connecting the DV-CP704—Continued

Connecting Your TV or Projector

This section explains how to connect the DV-CP704 to your TV or projector.

In this hookup example, the TV handles the audio and video. To enjoy Dolby Digital or DTS (5.1-channel surround), you’ll need a compatible decoder (see page 19).

The DV-CP704 has three types of video output: compo- nent video, S-Video, and composite video. Component video offers the best picture quality, so if your TV supports it, use a commercially available component video cable to connect the DV-CP704’s COMPONENT VIDEO OUT- PUT to the component video inputs on your TV. If your TV supports progressive scanning, you must use compo- nent video in order to take advantage of that feature. S-Video offers better picture quality than composite video, so if your TV supports it, use the S-Video cable to connect the DV-CP704’s S VIDEO OUTPUT to an S-Video input on your TV. Failing that, use the supplied

composite video cable to connect the DV-CP704’s VIDEO OUTPUT to a composite video input on your TV.

Compatibility of this unit with progressive-scan TVs.

This player is compatible with progressive video Macro Vision System Copy Guard.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOM- MENDED THAT THE USER SWITCH THE CON- NECTION TO THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARD- ING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

(red)

(white)

(yellow)

Component video cable

S-Video cable

AV RCA/phono cable (supplied)

(red)

(white)

Only one connection required! Choose component video, S-Video, or composite video.

(yellow)

S VIDEO IN

IN

Y

PB

TV or projector

PR

VIDEO IN

L

R

ANALOG

INPUT

Notes:

•Before making any connections, turn off the DV-CP704 and your TV and disconnect their power cords from the wall outlets.

•Also refer to the connection information supplied with your TV.

•If you connect a TV that does not support progressive scanning to the component video output, change the HDMI Output Setting to Off (see page 44).

18

•Connect the DV-CP704’s video outputs directly to your TV. Don’t connect a VCR or other video equip- ment in between your DV-CP704 and TV. Doing so may result in picture distortion, because of the copy protection system used on DVD-Video discs.

•When you use the analog audio outputs, don’t play DTS CDs or don’t select DTS soundtracks on DVD-Video discs. Doing so will produce unpleasant digital noise, which may damage your equipment.