Onkyo DV-CP704S Connecting a Component with an Hdmi Input, What is HDMI?, Using Hdmi, AV receiver

Connecting the DV-CP704—Continued

Digital Connection

Use an optical (or coaxial) digital audio cable to connect the DV-CP704’s COAXIAL (or OPTICAL) DIGITAL AUDIO OUTPUT to an optical (or coaxial) input on your stereo amp, as shown.

Signal flow

OPTICAL

COA

XIAL

Connect one or the other

COAXIALOPTICAL

Optical digital cable

Coaxial digital

cable

(supplied)

Notes:

•Be sure to set the Audio menu, Digital/HDMI Audio Out setting to “PCM” (see page 45). Otherwise an unpleasant digital noise may be heard, which may damage your equipment.

•Never connect the DV-CP704 to the AC-3RF input on a Dolby Digital receiver. The AC-3RF format is not supported by the DV-CP704.

Connecting a Component with an HDMI Input

This section shows how to connect the DV-CP704 to a AV receiver, HDTV, or projector that has an HDMI input socket.

What is HDMI?

HDMI (High Definition Multimedia Interface) is a new connection format that can carry uncompressed, stan- dard or high definition digital video and up to eight chan- nels of digital audio. Until now, several separate video and audio cables have been required to connect AV com- ponents together. With HDMI, a single cable is all that’s necessary to achieve the best picture and audio quality. HDMI video is compatible with DVI (Digital Visual Interface). To send HDMI video to a DVI input requires an HDMI-to-DVI cable. The DV-CP704 supports HDCP (High-bandwidth Digital Content Protection), and for an HDMI-to-DVI connection to work, the other component must also support it. Note that this may not work with some DVI components.

Using HDMI

Use the HDMI cable to connect the DV-CP704’s HDMI OUT to an HDMI input on your AV receiver. Alterna- tively, you can connect the DV-CP704 directly to the HDMI input on your TV.

HDMI cable

	HDMI
	IN
	or
	AV receiver
HDMI
IN
HDMI	HDMI
	IN

Signal flow

HDTV, projector

HDTV, projector

20