Checking the system operations (cont.)
Removing the tape
1 Slide the OPEN/EJECT lever in the direction
of the arrow, and open the cassette cover. When the cover is fully opened, the cassette holder pops out automatically.
2
OPEN/EJECT
1
2 Take out the cassette tape.
3 Press the part marked “PUSH” and close the cassette holder.
3
4 Close the cassette cover after the cassette holder has been completely retracted.
4
O Check that the
O Close the cassette cover if you are not going to insert a cassette tape immediately after removing another.
O Do not attempt to remove a tape while you are recording. The cassette cover opens but recording will continue, allowing outside light and dust to adversely affect the tape.
Turning off the power
CAMERA
VCR
POWER
FF | ON M | O |
O |
| DE |
Hold down the white button and turn the POWER lever to the OFF position.
The power is now turned off, and the CAMERA lamp goes off.
Disconnecting the power cord
3
2
1 
3
1 Disconnect the AC cord from the power outlet.
2 Disconnect the DC cord from the DC input socket.
3 Disconnect the DC cord and AC cord from the AC adapter.
14 (E)
