Panasonic AG-DVC30 specifications 76 E

Menu configuration (cont.)

RECORDING SETUP screen

Item/
(Display	Description of settings
mode)
TCG	Use this to set the mode in which to
(CAMERA)	advance the time code.
(VCR)	FREE RUN:
	The time code is advanced continuously
	regardless of the operation mode.
	It is recorded on the basis of the time
	appearing on the camera-recorder’s
	calendar clock.
	REC RUN:
	The time code is advanced only when
	recording is underway.
	It is recorded while ensuring that
	continuity is maintained with the time
	code already recorded on the tape when
	shooting with frame-to-frame continuity.
FIRST REC TC	Use this to select the time code to be
(CAMERA)	recorded when recording is started.
(VCR)	REGEN:
	Select this to record the time code that
	will ensure continuity with the time code
	already on the tape.
	The time code is recorded in the REC
	RUN mode regardless of the setting
	selected for the TCG item.
	PRESET:
	Select this to record the time code using
	the value selected by the TC PRESET
	item as the initial value.
	However, when shooting with frame-to-
	frame continuity has taken place, the
	time code is recorded to ensure
	continuity with the time code already on
	the tape.
TC PRESET	Use this to set the initial value of the time
(CAMERA)	code to be recorded.
(VCR)	The item takes effect when “PRESET” has
	been selected as the FIRST REC TC item
	setting.
1394 UB	Use this to select the user’s bit to be
REGEN	recorded when recording the signals of the
(VCR)	unit connected to the DV connector.
	OFF:
	The user’s bit selected by the UB MODE
	item is recorded.
	ON:
	The user’s bit of the signals input to the
	DV connector is recorded.
	O When “ON” has been selected as this
	item’s setting, it takes precedence over
	the UB MODE item setting.
	O If the signals do not contain the user’s bit
	information, the user’s bit is not
	recorded.
	O If no signals are input to the DV
	connector, the UB MODE item setting is
	used for the recording.

Item/
(Display	Description of settings
mode)
UB MODE	Use this to set what is to be recorded as
(CAMERA)	the user’s bit.
(VCR)	USER:
	The user’s information is recorded.
	TIME:
	The recording time is recorded.
	DATE:
	The recording date is recorded.
	TCG:
	The time code is recorded.
UB PRESET	Use this to set the user’s bit.
(CAMERA)	For this, however, “USER” must have been
(VCR)	selected as the UB MODE item setting.
ONE-SHOT	Use the ON setting when shooting on a
REC	frame-by-frame basis.
(CAMERA)	OFF:
	Frame-by-frame shooting is not
	performed.
	ON:
	The camera-recorder is set to the frame-
	by-frame shooting mode.
	When the START/STOP button is
	pressed, recording proceeds for the
	number of seconds selected by the REC
	TIME item setting, and then the camera-
	recorder is set to the REC PAUSE
	mode.
REC TIME	Use this to set the recording time for frame-
(CAMERA)	by-frame shooting.
	0.5s : 0.5 sec.	1s : 1.0 sec.
	1.5s : 1.5 sec.	2s : 2.0 sec.

The underlining indicates the factory setting.

76 (E)