Panasonic AG-DVC30 specifications SW Mode screen, 74 E

Menu configuration (cont.)

SW MODE screen

Item/
(Display	Description of settings
mode)
USER1	This enables one function to be allocated to
(CAMERA)	the USER1 button.
(VCR)
	$ Camera menu mode
	(PUSH) AF+ZOOM:
	Select this to execute one-touch
	zooming. (P40)
	(PUSH) AF:
	Select this to switch to auto focus mode
	when the camera-recorder is operated in
	the manual focus mode but only while
	the button is held down.
	WHITE BAL:
	This works in the same way as the
	WHITE BAL button when the white
	balance is to be set. (P44, P45)
	AWB LOCK:
	Select this to enable operations to be
	performed with the white balance that
	was in effect when the button was
	pressed while operating the camera-
	recorder in the auto white balance mode.
	(P44)
	BACKLIGHT:
	Select this to set the backlight
	compensation function to ON or OFF.
	(P40)
	SPOTLIGHT:
	Select this to set the auto iris control for
	the spotlight to ON or OFF.
	REC CHECK:
	Select this to perform a rec check. (P13)
	D. ZOOM:
	Select this to perform digital zooming.
	(P35)
	WHITEFADE:
	Select this to fade out the whole image
	in white while the button is held down
	during shooting. At the same time, the
	sound is also faded out.
	Conversely, fade-in in white occurs when
	the button is released. At the same time,
	the sound is also faded in.
	BLACKFADE:
	Select this to fade out the whole image
	in black when the button is held down
	during shooting. At the same time, the
	sound is also faded out.
	Conversely, fade-in in black occurs when
	the button is released. At the same time,
	the sound is also faded in.
	PHOTO SHOT:
	Select this for photo shot recording.
	(P38)
	INDEX:
	Select this for index recording. (P40)
	SNS:
	Select this to set the camera-recorder to
	the high-sensitivity shooting mode. (P36)

Item/
(Display	Description of settings
mode)
	EVF DTL:
	Select this to emphasize the outlines of
	the images on the screen when the
	button is pressed so that the subject
	becomes easier to bring into focus. “EVF
	DTL ON” appears for about 2 seconds in
	the centre of the screen after the button
	has been pressed. However, the regular
	images are what is recorded, not the
	ones with their outlines emphasized.
	The original images are restored by
	pressing the button again. “EVF DTL
	OFF” appears for about 2 seconds in the
	centre of the screen.
	LUMI-FLICK:
	Select this to make the screen flicker so
	that images which will give the
	impression that reels of photographic
	film are turning just as they did years
	ago are recorded.
	AE LOCK:
	Select this to set the camera-recorder to
	the AE lock mode. (P40)
	$ VCR menu mode
	BLANK SEARCH:
	Select this to conduct a blank search.
	(P51)
	AUDIO DUB:
	This works in the same way as the
	A.DUB button on the remote control unit
	when performing audio dubbing. (P57)
	INDEX:
	Select this for index recording. (P40)
USER2	This enables one function to be allocated to
(CAMERA)	the USER2 button.
(VCR)	For further details, refer to the USER1 item.
	$ Camera menu mode
	(PUSH) AF+ZOOM, (PUSH) AF, AWB LOCK,
	BACKLIGHT, SPOTLIGHT, REC CHECK,
	D. ZOOM, WHITEFADE, BLACKFADE,
	PHOTO SHOT, INDEX, EVF DTL, LUMI-FLICK,
	AE LOCK
	$ VCR menu mode
	BLANK SEARCH, AUDIO DUB, INDEX
USER3	This enables one function to be allocated to
(CAMERA)	the USER3 button.
(VCR)	For further details, refer to the USER1 item.
	$ Camera menu mode
	(PUSH) AF+ZOOM, (PUSH) AF, AWB LOCK,
	BACKLIGHT, SPOTLIGHT, REC CHECK,
	D. ZOOM, WHITEFADE, BLACKFADE,
	PHOTO SHOT, INDEX, EVF DTL, LUMI-FLICK,
	AE LOCK
	$ VCR menu mode
	BLANK SEARCH, AUDIO DUB, INDEX

The underlining indicates the factory setting.

74 (E)