Panasonic AG-DVC30 specifications Recording Setup screen, 75 E

ENGLISH

Menu configuration (cont.)

SW MODE screen

Item/
(Display		Description of settings
mode)
FOCUS RING	Use this to select the function to be
(CAMERA)	allocated to the focus ring.
	ZOOM:
	Zooming can be performed using the
	focus ring when the camera-recorder is
	operated in the auto focus mode.
	IRIS:
	Iris adjustments can be performed using
	the focus ring when the camera-recorder
	is operated in the auto focus mode and
	the iris is to be adjusted manually.
	OFF:
	The focus ring is used to perform manual
	focus adjustments only.
IRIS DIAL	Use this to set how the iris is to be
(CAMERA)	controlled by the direction in which the multi
	dial is rotated when the iris is to be adjusted
	manually.
	DOWN OPEN:
	The iris opens when the multi dial is
	turned downward.
	UP OPEN:
	The iris opens when the multi dial is
	turned upward.
ZOOM MODE	Use this to set the speed of the motor-
(CAMERA)	driven lens zoom. (P35)
	NORM: Standard
	HIGH	: High speed
	LOW	: Low speed
FRONT S/S	Use this to set whether the recording
INHIBIT	operation is to be performed using the
(CAMERA)	START/STOP button on the lens.
	OFF:
	Recording is permitted.
	ON:
	Recording is inhibited so as to prevent
	operation from being conducted by
	mistake.
SNS	Use this to select the high-sensitivity
(CAMERA)	shooting mode. (P36)
	IR, SUPER_IR, COLOUR_NS
D. ZOOM	Use this to select the magnification level for
(CAMERA)	the digital zoom. (P35)
	x24, x160

RECORDING SETUP screen

Item/
(Display	Description of settings
mode)
REC SPEED	Use this to select the recording duration
(CAMERA)	mode.
(VCR)	SP: SP (standard recording) mode.
	LP: LP (long recording) mode.
AUDIO REC	Use this to select the digital audio recording
(CAMERA)	system.
(VCR)	32K (12bit):
	The sound is recorded using the 12-bit/
	32 kHz (4 channels) recording system.
	Select this mode when leaving the sound
	heard during shooting intact even when
	audio dubbing is performed on an
	existing recording.
	48K (16bit):
	The sound is recorded using the 16-bit/
	48 kHz (2 channels with a good sound
	quality) recording system.
	The sound heard during shooting will be
	erased when dubbing over an existing
	recoding.
WIND CUT	Select ON to reduce the noise generated
(CAMERA)	by the wind blowing into the microphone in
(VCR)	windy conditions.
	OFF, ON
ID SET	Use this to set the ID (5 characters)
(CAMERA)	information. The ID information set is
	displayed when the colour bar mode is
	established.
	O Characters which can be set:
	) (space), A to Z, 0 to 9, :, ., /
TIME STAMP	Set this to REC to record the date and time
(CAMERA)	that were selected using the DATE/TIME
	setting item (P77) on the DISPLAY SETUP
	screen as an image on the tape.
	NO-REC, REC
1394 TC	Use this to select the time code to be
REGEN	recorded when recording the signals of the
(VCR)	unit connected to the DV connector.
	OFF:
	The time code that was selected using
	the TCG setting item and FIRST REC
	TC setting item is used for the recording.	MENUS
	ON:
	The time code of the signals which are
	input to the DV connector are used for
	the recording.
	O When ON has been selected for this
	item, the time code of the signals
	concerned takes precedence over the
	TCG item and FIRST REC TC item
	settings.
	O If no signals are input to the DV
	connector, the TCG item and FIRST
	REC TC item settings are used.

The underlining indicates the factory setting.

75 (E)