Panasonic AG-DVC30 specifications 79 E

ENGLISH

Menu configuration (cont.)

OTHER FUNCTIONS screen

Item/		Item/
(Display	Description of settings	(Display	Description of settings
mode)		mode)
BEEP SOUND	Select ON to be warned by a beep that the	USER FILE	LOAD:
(CAMERA)	shooting has started or ended or that a	(CAMERA)	The menu (except scene file) settings
	problem has occurred.	(VCR)	which were saved last are loaded.
	OFF, ON		SAVE:
			The changed menu settings are saved.
	The beeps are output as audio signals from		INITIAL:
	the PHONES jack and AV IN/OUT jack.		The menu settings are returned to the
	When a beep is sounded, the audio signals		factory settings.
	from the built-in microphone are muted and		O When the power is turned off without
	the beep is output instead.		selecting SAVE, the VCR mode menu
	One beep sounds:		settings will be saved but the CAMERA
	O when the POWER lever is set to the ON		mode menu settings will be returned to
	position		the original settings.
	O when shooting has started		O When a LOAD or INITIAL operation has
	Two beeps sound:		been performed, set the camera-
	O when shooting is paused		recorder’s POWER lever first to the OFF
	10 beeps sound in succession:		position and then back to ON in order to
	O when a cassette tape has not been		ensure that the settings concerned will
	inserted		take effect.
	O when the cassette tape is set to the
		HOUR METER	Use this to display the total running time (a
	recording inhibited status
		(CAMERA)	5-digit figure in 1-hour increments) of the
	O when condensation has formed inside
		(VCR)	cylinder head.
	the camera-recorder
	O when a problem has occurred in the
	camera-recorder
CLOCK SET	Use this to set the camera-recorder’s
(CAMERA)	internal calendar.
(VCR)
TIME SHIFT	The time set using this item is added to the
(CAMERA)	clock time of the internal calendar (time
(VCR)	difference compensation) and displayed on
	the viewfinder and LCD monitor. The added
	time is also recorded on the tape.
	+23h --- +1h, OFF, –1h --- –23h
	(In 1-hour increments)
TAPE	When the camera-recorder has been left in
PROTECT	the pause mode for about 5 minutes, it is
(CAMERA)	automatically set to the tape protection
	mode.
	Use this item to select the kind of tape
	protection mode to be established.
	POWER OFF:
	The camera-recorder’s power is set to			MENUS
	The cylinder head is set to the stop
	OFF.
	STBY:
	status.
IR LED	Use this to set the control over the infrared
(CAMERA)	light which is used during high-sensitivity
	recording. (P36)
	AUTO:
	The infrared light comes on as soon as
	the high-sensitivity shooting mode is
	established.
	OFF:
	The infrared light does not come on no
	matter whether the high-sensitivity
	shooting mode is established or not.
		The underlining indicates the factory setting.

79 (E)