Onkyo instruction manual Connecting the Power/Turning on the DV-SP305

Connecting the Power/Turning on the DV-SP305

Before connecting

•Make sure that all the connections on pages 16–20 are complete (the connection to a TV is required).

STANDBY/ON

ON	ON STANDBY
	OPEN/
	CLOSE

PLAY

MODE

1 2 3

DISPLAY

4 5 6

7 8 9

0CLEAR

TOP MENU	MENU
	ENTER
RETURN	SETUP

1Plug the supplied power cord into the AC INLET and then into the power outlet on the wall.

•Do not use a power cord other than the one supplied with the DV-SP305. The power cord supplied is designed for use with the DV-SP305 and should not be used with any other device.

•Never have the power cord discon- nected from the DV-SP305 while the other end is plugged into the wall out- let. Doing so may cause an electric shock. Always connect by plugging into the wall outlet last and disconnect by unplugging from the wall outlet first.

To a wall outlet

AUDIO ANGLE SUBTITLE ZOOM

RC-616DV

2

Remote

controller

ON

Press STANDBY/ON on the DV-SP305 or ON on the remote controller.

The DVD Player turns on.

•To put the DV-SP305 in the standby mode, press STANDBY/ON on the DV-SP305, or STANDBY on the remote controller. Be sure to set the volume to minimum before putting the DV-SP305 in the standby mode for the next use to avoid sudden loud sound reproduction.

•Setting the STANDBY/ON button to standby does not shut off the power completely.

Note:

•This player features a screen saver and an auto power off function. If the player is stopped and no button is pressed for five minutes, the screen saver starts. If the disc tray is closed but no disc is playing and no control is pressed for 30 minutes, the player automatically goes into standby.

21