Tripp Lite ULTRAFAX owner manual Isoblok, Isofax, Ultrablok,Ultracoax, Safety, Quick Installation

	Owner's Manual
	ISOBLOK, ISOFAX,
	ULTRABLOK,ULTRACOAX,
	ULTRACOPY, ULTRAFAX
1111 W. 35th Street	Isobar® Premium Direct Plug-In
	Surge Suppressors (120V)
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com	FRANÇAIS : p. 5

ESPAÑOL : p. 9

Safety

•Install your surge suppressor indoors, away from excess moisture, heat and dust.

•Connect your surge suppressor to a grounded AC power outlet. Do not remove or modify the ground pin of the surge suppressor's plug. Do not use two-prong adapters with the surge suppressor's plug.

•Do not use mounting tab and screw (provided with select models) in Canada. Canadian regulations prohibit permanent mounting of these surge suppressors. Use of the mounting tab in Canada will void your insurance and warranty.

•Your surge suppressor does not require maintenance. Do not open your surge suppressor for any reason. There are no user-serviceable parts inside.

Quick Installation

1	Plug surge suppressor into a 3-wire,
	grounded, 60 Hz.,120V electrical outlet.

• All models except the ULTRACOPY should be plugged into standard NEMA 15-amp wall sockets.

• The ULTRACOPY must be plugged into a NEMA 5-20R 20-amp receptacle.

2	Optional: secure surge suppressor with
	outlet's cover mounting screw.

• Screwing the surge suppressor to the outlet will prevent the unit from being accidentally disconnected.

• The spring steel mounting tab on select models should be adjusted until it is flush with the surge suppressor's rear, then screwed into place.

3	Plug your electrical equipment into your
	surge suppressor's outlets.
	• You may safely connect a total load of no more than 15 amps
	(20 amps for the ULTRACOPY model) to your surge suppressor.
	• Your electrical equipment is now protected from AC surges on the
	power line.
	Copyright © 2000 Tripp Lite. All rights reserved. Isobar® is a registered trademark of Tripp Lite.	1