Connecting

Connecting to a TV

Before connecting

• Refer also to the instruction manual of the TV.

• Connect the plugs securely.

When you connect the DVD Player to the TV, be sure to turn off the power and unplug both units from the mains before making any connections.

Connect the DVD Player to the TV directly. If you connect the DVD Player to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected.

Incomplete

Insert completely

Using the supplied audio/video connection cable

Using the supplied audio/video cable, make audio connections from the ANALOG OUTPUT CH 1 or

CH 2 L and R jacks to the corresponding audio input jacks on the TV. In the same manner, make video connection from the VIDEO OUTPUT VIDEO jack to the corresponding video input jack on the TV.

By making connections to a stereo system, you can improve the quality of the sound. Using an audio cable (not supplied), make audio connections from the ANALOG OUTPUT CH 1 or CH 2 L and R jacks to the corresponding jacks on the stereo component.

Note

Be sure to match the colors of the plugs on the cable with the corresponding jacks on the DVD Player and the TV: yellow for video, red for R (right) audio and white for L (left) audio.

If the TV audio is monaural, leave the red plug disconnected.

Be sure to set the TV Aspect after connection using the Setup Navigator explained in “Setting Up the Player” starting on page 21 or the function setting menu explained in “Adjusting Audio and Video Settings” starting on page 46.

 

COMPONENT

S VIDEO

VIDEO

Y

PB

PR

 

VIDEO

OUTPUT

CH 1

CH 2 FRONT SURR 1 CENTER SURR 2

L

L

DIGITAL OUTPUT

ANALOG

SURR

OUTPUT

1

1+2

R

R

 

Stereo audio/video connection cable

To audio and video input

Video (Yellow)

L (White)

R (Red)

SACD & DVD AUDIO/VIDEO PLAYER

MODEL NO. DV-SP800

: Signal flow

AC INLET

DO NOT connect the mains lead at this time.

SUB

OPTICAL

COAXIAL

WOOFER

REMOTE

CONTROL

Notes

Connect the player’s video output directly to the television.

Since the player is compatible to analog copy protection there may be cases when recordings from the deck may be distorted during playback.

Progressive signals are not output from the players video or S1/S2 video output jack.

15

Page 15
Image 15
Onkyo DV-SP800 instruction manual Connecting to a TV, Using the supplied audio/video connection cable, Before connecting