Onkyo DV-SP800 Connecting to a TV, Making component video connections, Making S-video connections

Connecting to a TV

Making component video connections

If the TV or monitor has component video inputs, making this type of video connection will produce the ideal picture quality for the presentation of DVD-Video. Using a component video cable (sold separately), connect the VIDEO OUTPUT COMPONENT jacks to the corresponding component video input jacks on the TV.

Actual labels for component video inputs may vary depending on the TV manufacturer. (e.g. Y, R-Y, B-Y or Y, CB, CR)

In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

By making connections to a stereo system, you can improve the quality of the sound. Using an audio cable (not supplied), make audio connections from the ANALOG OUTPUT CH 1 or CH 2 L and R jacks to the corresponding jacks on the stereo component.

	COMPONENT	S VIDEO	VIDEO
Y	PB	PR

VIDEO

OUTPUT

CH 1 CH 2 FRONT SURR 1 CENTER SURR 2

L	L	DIGITAL OUTPUT
ANALOG	SURR
OUTPUT	1 1+2
R	R
SUB	OPTICAL	COAXIAL
WOOFER

Be sure to set the TV Aspect after connection using the Setup Navigator explained in “Setting Up the Player” starting on page 21 or the function setting menu explained in “Adjusting Audio and Video Settings” starting on page 46.

Component video cable

To component video input

Stereo audio connection cable

To audio input

L (White)

R (Red)

	: Signal flow
	AC INLET
	SACD & DVD AUDIO/VIDEO PLAYER
	MODEL NO. DV-SP800
	DO NOT connect
REMOTE	the mains lead at
CONTROL	this time.

Making S-video connections

If the TV or monitor has an S video input, make the S video connection. The S video connection will provide higher quality picture playback.

By making connections to a stereo system, you can improve the quality of the sound. Using an audio cable (not supplied), make audio connections from the ANALOG OUTPUT CH 1 or CH 2 L and R jacks to the corresponding jacks on the stereo component.

Notes

•If you make the S video connection, leave the yellow plug disconnected.

•If the TV audio is monaural, leave the red plug disconnected.

S video connection cable

To S video input

R (Red)

L (White)

Stereo audio connection cable

To audio input

16