Onkyo DV-SP800 Adjusting Audio and Video Settings, Setting the Audio 1 Options, Dolby Digital Out

Adjusting Audio and Video Settings

Adjusting the Dynamic Range of the Audio Soundtrack

Audio DRC stands for Audio Dynamic Range Compression. When [Audio DRC] is [On], soft sounds such as dialog can be heard more clearly without making loud sounds even louder. When [Audio DRC] is set to [Off], there is no effect on the audio source.

Make changes to the [Audio DRC] setting in the Setup screen Audio menu.

Audio1	A2	Video1	V2	Language	General
		Audio DRC		Off
	Dolby Digital Out			On
		DTS Out		— DTS 3PCM
	Linear PCM Out			— Down Sample On
		MPEG Out		— MPEG 3PCM
		Digital Out		— On
	SACD Playback			— 2ch Area
	Move				SETUP Exit

Settings: Off (Factory setting)

On

Notes

•Audio DRC is only effective with Dolby Digital audio sources.

•The level of Audio DRC may differ depending on the DVD.

•If you have set the [Dolby Digital Out] to [PCM] and the [Digital Out] setting to [On], the Audio DRC effect is output through the digital out jack.

•The effect of Audio DRC depends on your speakers and AV amplifier settings.

Setting the Audio 1 Options

This player is capable of digital audio output for Dolby Digital, DTS, MPEG, and signals with a sampling rate of 96 kHz. Make settings in the Setup screen Audio menu to reflect the capabilities of the components that you have made digital connections to.

Notes

•If you have already completed the Setup Navigator screen operations, the settings on this page have already been set by the player.

•If you have made only stereo line connections (analog) using the supplied audio cord, it is not necessary to make any changes in this menu.

■Dolby Digital Out

This player is capable of outputting the Dolby Digital surround sound audio signal. If the player is connected to an AV component that has a built-in Dolby Digital decoder, select [Dolby Digital]. This player can also convert the Dolby Digital signal to a digital Linear PCM signal, the same digital signal output from a CD. Select [Dolby Digital 3 PCM] if you have made connections to an amplifier or receiver with a Dolby Pro Logic decoder or a Digital Analog Converter (DAC).

Audio1	A2	Video1	V2	Language	General
		Audio DRC		— Off
	Dolby Digital Out			Dolby Digital
		DTS Out		Dolby Digital 3 PCM
	Linear PCM Out			— Down Sample On
		MPEG Out		— MPEG 3PCM
		Digital Out		— On
	SACD Playback			— 2ch Area
	Move				SETUP Exit

Settings: Dolby Digital (Factory setting)

Dolby Digital 3 PCM

48