Onkyo HT-R590 instruction manual Listening modes cannot be selected with some source formats

Listening Mode							Description	Input	Speaker
								Source	Layout
Dolby Digital							In this mode, audio from the input source is output without surround-sound	D	XCN
							processing. The speaker configuration (presence of speakers), crossover	F
	D o l b y				D
							frequency, speaker distance, A/V Sync and much of the processing set via
Dolby Digital Plus*6							Home menu are enabled. See “Advanced Setup” for more details	D	XCN
							(➔ page 34).
								F	XCN*2
	D o l b y				D	+
Dolby TrueHD								D	XCN
								F	XCN*2
	D o l b y				T r u e H D
DTS								D	XCN
	D T S
DTS-HD High								F	XCN*2
Resolution Audio
	D T S – H D					H R
DTS-HD Master								D	XCN
Audio
								F	XCN*2
	D T S – H D					M S T R
DTS Express								D	XCN
	D T S			E x p r e s s
DSD*7
	D S D
DTS 96/24							This mode is for use with DTS 96/24 sources. This is high-resolution DTS	D	XCN
							with a 96 kHz sampling rate and 24-bit resolution, providing superior
	D T S		9 6 / 2 4
							fidelity. Use it with DVDs that bear the DTS 96/24 logo.
DTS-ES Discrete*8							This mode is for use with DTS-ES Discrete soundtracks, which use a	G	N*5
							discrete surround back channel for true 6.1/7.1-channel playback. The seven
	E S		D i s c r e t e
							totally separate audio channels provide better spatial imaging and 360-
							degree sound localization, perfect for sounds that pan across the surround
							channels. Use it with DVDs that bear the DTS-ES logo, especially those with
							a DTS-ES Discrete soundtrack.
DTS-ES Matrix*8							This mode is for use with DTS-ES Matrix soundtracks, which use a matrix-
							encoded back-channel for 6.1/7.1-channel playback. Use it with DVDs that
	E S		M a t		r	i x
							bear the DTS-ES logo, especially those with a DTS-ES Matrix soundtrack.
Neo:6							This mode expands any 2-channel source for up to 7.1-channel playback. It	S	XCN*5
							uses seven full-bandwidth channels of matrix decoding for matrix-encoded
	N e o : 6
							material, providing a very natural and seamless surround sound experience
							that fully envelops the listener.
	N e o : 6 C i n e m a
							• Neo:6 Cinema
							Use this mode with any stereo movie (e.g., TV, DVD, VHS).
	N e o : 6				M u s i c
							• Neo:6 Music
							Use this mode with any stereo music source (e.g., CD, radio, cassette, TV,
							VHS, DVD).
							This mode uses Neo:6 to expand 5.1-channel sources for 6.1/7.1-channel	D	N*5
							playback.
	Note
*1		These listening modes cannot be selected during USB or iPod playback.
*2		When the input source contains the encoded front high channel, front high speakers output the sound.
*3		If there are no surround back speakers, Dolby Pro Logic II is used.
*4		Surround back speakers are not supported.
*5		Front high speakers are not supported.
*6		For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system.
*7		AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the player side to PCM might obtain a better
		sound according to the player. In that case, set the output setting on the player side to PCM.
*8		If there are no surround back speakers, DTS is used.

• The listening modes cannot be selected with some source formats.

En

30