Onkyo HT-R590 Hdmi Input, Component Component Video Input, Digital Audio Digital Audio Input

HDMI Input

Menu HDMI Input

If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2, you must assign “HDMI2” to the “BD/DVD” input selector.

Here are the default assignments.

Input selector	Default assignment
BD/DVD	HDMI1
VCR/DVR	HDMI2
CBL/SAT	HDMI3
GAME	HDMI4
AUX	- - - - -
TV/CD	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,

TV/CD

`HDMI1, HDMI2, HDMI3, HDMI4:

Select a corresponding HDMI input that the video component has been connected.

`- - - - -:

Select if you’re not using the HDMI OUT. Each HDMI input cannot be assigned to two input selectors or more. When HDMI1 - HDMI4 have already been assigned, you must set first any unused input selectors to “- - - - -”, or you will be unable to assign HDMI1 - HDMI4 to input selector.

Note

•When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN.

•Do not assign the component connected with the HDMI input to TV/CD selector when you set “HDMI Ctrl (RIHD)” setting to “On” (➔ page 42). Otherwise, appropriate CEC (Consumer Electronics Control) operation will not be guaranteed.

Component (Component Video Input)

Menu Component

If you connect a video component to a component video input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to COMPONENT VIDEO IN 2, you must assign “IN2” to the “BD/DVD” input selector.

Here are the default assignments.

Input selector	Default assignment
BD/DVD	IN1
VCR/DVR	- - - - -
CBL/SAT	IN2
GAME	- - - - -
AUX	- - - - -
TV/CD	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,

TV/CD

`IN1, IN2:

Select a corresponding component video input that the video component has been connected.

`- - - - -:

Select if you’re not using the COMPONENT

VIDEO OUT.

Digital Audio (Digital Audio Input)

Menu Digital Audio

If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to the OPTICAL IN 1, you must assign “OPTICAL1” to the “TV/CD” input selector.

Here are the default assignments.

Input selector	Default assignment
BD/DVD	COAXIAL1
VCR/DVR	- - - - -
CBL/SAT	COAXIAL2
GAME	OPTICAL1
AUX	- - - - -
TV/CD	OPTICAL2

■BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,

TV/CD

`COAXIAL1, COAXIAL2, OPTICAL1, OPTICAL2:

Select a corresponding digital audio input that the component has been connected.

`- - - - -:

Select if the component is connected to an analog audio input.

Note

•When an HDMI IN is assigned to an input selector in “HDMI Input” (➔ page 35), this input assignment is automatically set to the same HDMI IN. And in addition to the usual inputs (e.g., COAXIAL1, COAXIAL2, etc.), you can also select HDMI inputs.

•Available sampling rate for PCM signals from a digital input (optical and coaxial) is 32/44.1/48/88.2/96 kHz/16, 20, 24 bit.

En

35