If the video source is connected to an HDMI input,

14, 35

you must assign that input to an input selector, and

 

your TV must be connected to the HDMI OUT.

 

 

 

On your TV, make sure that the video input to which

—

the AV receiver is connected is selected.

 

 

 

■There’s no picture from a source connected to an HDMI IN

Reliable operation with an HDMI-to-DVI adapter is 57 not guaranteed. In addition, video signals from a PC are not guaranteed.

■The on-screen menus don’t appear

On your TV, make sure that the video input to which — the AV receiver is connected is selected.

When the AV receiver doesn’t connect TV with

—

HDMI, onscreen menus are not displayed.

 

 

 

Tuner

■Reception is noisy, FM stereo reception is noisy, or the FM STEREO indicator doesn’t light

Relocate your antenna.

—

Move the AV receiver away from your TV or

—

computer.

 

Listen to the station in mono.

22

 

 

When listening to an AM station, operating the

—

remote controller may cause noise.

 

Passing cars and airplanes can cause interference.

—

 

 

Concrete walls weaken radio signals.

—

 

 

If nothing improves the reception, install an outdoor — antenna.

Remote Controller

■The remote controller doesn’t work

Before operating this unit, be sure to press

—

RECEIVER.

 

 

 

Make sure that the batteries are installed with the

4

correct polarity.

 

Install new batteries. Don’t mix different types of

4

batteries, or old and new batteries.

 

 

 

Make sure that the remote controller is not too far

4

away from the AV receiver, and that there’s no

 

obstruction between the remote controller and the

 

AV receiver’s remote control sensor.

 

Make sure that the AV receiver is not subjected to

—

direct sunshine or inverter-type fluorescent lights.

 

Relocate if necessary.

 

 

 

If the AV receiver is installed in a rack or cabinet

—

with colored-glass doors, the remote controller may

 

not work reliably when the doors are closed.

 

Make sure you’ve selected the correct remote

10, 48

controller mode.

 

 

 

Make sure you’ve entered the correct remote control

47

code.

 

Make sure to set the same ID on both the AV

41

receiver and remote controller.

 

■ Can’t control other components

If it’s an Onkyo component, make sure that the u

16

cable and analog audio cable are connected properly.

 

Connecting only an ucable won’t work.

 

 

 

Make sure you’ve selected the correct remote

10, 48

controller mode.

 

If you’ve connected a cassette tape deck, to the

32

TV/CD IN jack, or an RI Dock to the TV/CD IN or

 

GAME IN or VCR/DVR IN jacks, for the remote

 

controller to work properly, you must set the display.

 

 

 

If you cannot operate it, you will need to enter the

47

appropriate remote control code.

 

To control an Onkyo component that’s connected

47

via u, point the remote controller at the AV

 

receiver. Be sure to enter the appropriate remote

 

control code first.

 

 

 

To control an Onkyo component that’s not

47

connected via upoint the remote controller at the

 

component. Be sure to enter the appropriate remote

 

control code first.

 

 

 

Recording

■ Can’t record

On your recorder, make sure the correct input is

—

selected.

 

 

 

To prevent signal loops and damage to the AV

—

receiver, input signals are not fed through to outputs

 

with the same name (e.g., VCR/DVR IN to

 

VCR/DVR OUT).

 

 

 

USB Device Playback

■Can’t access the music files on a USB device

Make sure the USB device is plugged in properly.

—

The AV receiver supports USB devices that support

55

the USB mass storage device class. However,

 

playback may not be possible with some USB

 

devices even if they conform to the USB mass

 

storage device class.

 

USB memory devices with security functions cannot

21

be played.

 

Others

■Standby power consumption

In the following cases, the power consumption may 42 reach up to a maximum of 37 W:

–“HDMI Ctrl (RIHD)” setting is set to “On”. (Depending on the TV status, the AV receiver will enter Standby mode as usual.)

–The “HDMI Through” setting is set to other than “Off”.

■The sound changes when I connect my headphones

When a pair of headphones is connected, the

—

listening mode is set to Stereo, unless it’s already set

 

to Stereo, Mono, or Direct.

 

En

52

Page 51 Page 53
Page 52
Image 52
Onkyo HT-R590 There’s no picture from a source connected to an Hdmi, On-screen menus don’t appear, Can’t record
Page 51 Page 53

HT-R590 specifications

The Onkyo HT-R590 is a versatile and feature-rich home theater receiver that has garnered attention for its impressive audio performance and user-friendly design. This device serves as the heart of a home entertainment system, delivering a dynamic audio experience that enhances movies, music, and gaming.

One of the standout features of the HT-R590 is its support for high-definition audio formats. The receiver is capable of decoding Dolby TrueHD and DTS-HD Master Audio, making it an excellent choice for those who appreciate high-quality sound in their media. With a powerful output of 100 watts per channel, it can drive even the most demanding speakers, ensuring that soundtracks and effects come to life with clarity and depth.

The HT-R590 also features a variety of connectivity options, including multiple HDMI inputs that support 4K video pass-through. This means that users can connect their Blu-ray players, gaming consoles, and streaming devices without hassle, making it easy to create a comprehensive home theater setup. The receiver also includes legacy connections for older devices, such as composite and component video inputs, providing flexibility for various audio and video sources.

Another notable characteristic of the Onkyo HT-R590 is its incorporation of Audyssey technology. This advanced room correction technology optimizes the sound output based on the specific acoustics of the room. By analyzing the space and adjusting the audio settings accordingly, users can achieve a balanced and immersive sound experience, regardless of room dimensions or speaker placements.

The user interface of the HT-R590 is designed with convenience in mind. A clear and intuitive remote control allows users to navigate settings, adjust audio levels, and switch inputs with ease. Furthermore, the on-screen display simplifies the setup process, guiding users through configuration steps to ensure optimal performance.

In addition to its robust audio capabilities, the Onkyo HT-R590 supports various streaming options through built-in Bluetooth technology. This allows users to easily connect their smartphones and tablets to stream music directly to the receiver, expanding the functionality beyond traditional home theater setups.

In summary, the Onkyo HT-R590 is an excellent choice for anyone looking to elevate their home audio experience. With its high-definition audio support, extensive connectivity options, advanced room correction technology, and user-friendly interface, this receiver stands out as a formidable option in the home theater market, delivering exceptional sound quality and versatility for a wide range of multimedia applications.
Top Page Image Contents