Only the front speakers produce sound

When the Stereo or Mono listening mode is selected,

29

only the front speakers and subwoofer produce

 

sound.

 

 

 

Check the Speaker Configuration.

36

 

 

Only the center speaker produces sound

If you use the Dolby Pro Logic IIx Movie, Dolby Pro — Logic IIx Music, or Dolby Pro Logic IIx Game listening mode with a mono source, such as an AM radio station or mono TV program, the sound is concentrated in the center speaker.

Make sure the speakers are configured correctly.

36

The surround speakers produce no sound

When the T-D (Theater-Dimensional), Stereo or

29

Mono listening mode is selected, the surround

 

speakers produce no sound.

 

 

 

Depending on the source and current listening mode,

2728

not much sound may be produced by the surround

 

speakers. Try selecting another listening mode.

 

Make sure the speakers are configured correctly.

36

The center speaker produces no sound

When the Stereo or Mono listening mode is selected,

29

the center speaker produces no sound.

 

 

 

Make sure the speakers are configured correctly.

36

 

 

The front high or surround back speakers produce no sound

Depending on the current listening mode, no sound 2728may be produced by the front high or surround back speakers. Select another listening mode.

Not much sound may be produced by the front high — or surround back speakers with some sources.

Make sure the speakers are configured correctly.

36

The subwoofer produces no sound

When you play source material that contains no

information in the LFE channel, the subwoofer

 

produces no sound.

 

 

 

Make sure the speakers are configured correctly.

36

 

 

There’s no sound with a certain signal format

Check the digital audio output setting on the

connected device. On some game consoles, such as

 

those that support DVD, the default setting is off.

 

 

 

With some DVD-Video discs, you need to select an

audio output format from a menu.

 

Depending on the input signal, some listening modes

2728

cannot be selected.

 

Can’t get 6.1/7.1 playback

If no surround back speakers or front high speakers

are connected, 6.1/7.1 playback is not possible.

 

 

 

You can not always select all of the listening modes,

2728

depending on the number of the speakers connected.

 

 

 

The speaker volume cannot be set as required

Check to see if a maximum volume has been set.

19

If the volume level of each individual speaker has

24, 37

been adjusted to high positive values, then the maxi- mum master volume possible may be reduced. Note that the individual speaker volume levels are set automatically after the Audyssey 2EQ® Room Cor- rection and Speaker Setup has been completed.

Noise can be heard

Using cable ties to bundle audio cables with power — cords, speaker cables, and so on may degrade the audio performance, so don’t do it.

An audio cable may be picking up interference. Try — repositioning your cables.

The Late Night function doesn’t work

Make sure the source material is Dolby Digital,

44

Dolby Digital Plus, or Dolby TrueHD.

 

About DTS signals

When DTS program material ends and the DTS

bitstream stops, the AV receiver remains in DTS

 

listening mode and the DTS indicator remains on.

 

This is to prevent noise when you use the pause, fast

 

forward, or fast reverse function on your player. If

 

you switch your player from DTS to PCM, because

 

the AV receiver does not switch formats

 

immediately, you may not hear any sound, in which

 

case you should stop your player for about three

 

seconds, and then resume playback.

 

With some CD and LD players, you won’t be able to — playback DTS material properly even though your player is connected to a digital input on the AV receiver. This is usually because the DTS bitstream has been processed (e.g., output level, sampling rate,

or frequency response changed) and the AV receiver doesn’t recognize it as a genuine DTS signal. In such cases, you may hear noise.

When playing DTS program material, using the

pause, fast forward, or fast reverse function on your

 

player may produce a short audible noise. This is not

 

amalfunction.

The beginning of audio received by an HDMI IN can’t be heard

Since it takes longer to identify the format of an

HDMI signal than it does for other digital audio

 

signals, audio output may not start immediately.

 

Video

There’s no picture

Make sure that all video connecting plugs are pushed

13

 

in all the way.

 

 

 

 

 

Make sure that each video component is properly

14, 16

 

connected.

 

 

If the video source is connected to a component

15, 35

 

video input, you must assign that input to an input

 

 

selector, and your TV must be connected to

 

 

COMPONENT VIDEO OUT.

 

 

If the video source is connected to a composite video

15

 

input, your TV must be connected to the

 

En

corresponding composite video output.

 

51

Page 51
Image 51
Onkyo HT-R590 Only the front speakers produce sound, Only the center speaker produces sound, Subwoofer produces no sound

HT-R590 specifications

The Onkyo HT-R590 is a versatile and feature-rich home theater receiver that has garnered attention for its impressive audio performance and user-friendly design. This device serves as the heart of a home entertainment system, delivering a dynamic audio experience that enhances movies, music, and gaming.

One of the standout features of the HT-R590 is its support for high-definition audio formats. The receiver is capable of decoding Dolby TrueHD and DTS-HD Master Audio, making it an excellent choice for those who appreciate high-quality sound in their media. With a powerful output of 100 watts per channel, it can drive even the most demanding speakers, ensuring that soundtracks and effects come to life with clarity and depth.

The HT-R590 also features a variety of connectivity options, including multiple HDMI inputs that support 4K video pass-through. This means that users can connect their Blu-ray players, gaming consoles, and streaming devices without hassle, making it easy to create a comprehensive home theater setup. The receiver also includes legacy connections for older devices, such as composite and component video inputs, providing flexibility for various audio and video sources.

Another notable characteristic of the Onkyo HT-R590 is its incorporation of Audyssey technology. This advanced room correction technology optimizes the sound output based on the specific acoustics of the room. By analyzing the space and adjusting the audio settings accordingly, users can achieve a balanced and immersive sound experience, regardless of room dimensions or speaker placements.

The user interface of the HT-R590 is designed with convenience in mind. A clear and intuitive remote control allows users to navigate settings, adjust audio levels, and switch inputs with ease. Furthermore, the on-screen display simplifies the setup process, guiding users through configuration steps to ensure optimal performance.

In addition to its robust audio capabilities, the Onkyo HT-R590 supports various streaming options through built-in Bluetooth technology. This allows users to easily connect their smartphones and tablets to stream music directly to the receiver, expanding the functionality beyond traditional home theater setups.

In summary, the Onkyo HT-R590 is an excellent choice for anyone looking to elevate their home audio experience. With its high-definition audio support, extensive connectivity options, advanced room correction technology, and user-friendly interface, this receiver stands out as a formidable option in the home theater market, delivering exceptional sound quality and versatility for a wide range of multimedia applications.