Onkyo HT-RC270 Input/Output Assign, Monitor Out, HDMI Input, Explanatory Notes, b Subwoofer

Explanatory Notes
a	Main menu	Speaker Setup

b■ Subwoofer

c `Yes:

Select if a subwoofer is connected.

`No:

Select if no subwoofer is connected.

aMenu selection

bSetting target

cSetting options (default setting underlined)

Input/Output Assign

Main Menu Input/Output Assign

Monitor Out

You can specify the output resolution for the HDMI OUT and COMPONENT VIDEO MONITOR OUT and have the AV receiver upconvert the picture resolution as neces- sary to match the resolution supported by your TV.

■Resolution

`Through:

Select this to pass video through the AV receiver at the same resolution and with no conversion.

`Auto:

Select this to have the AV receiver automatically convert video at resolutions not supported by your TV.

`480p:

Select this for 480p output and video conversion as necessary.

`720p:

Select this for 720p output and video conversion as necessary.

`1080i:

Select this for 1080i output and video conversion as necessary.

`1080p:

Select this for 1080p output and video conversion as necessary.

HDMI Input

If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2, you must assign “HDMI2” to the “BD/DVD” input selector.

If you’ve connected your TV to the AV receiver with an HDMI cable, composite video, S-video and component video sources can be upconverted* and output by the HDMI OUT. You can set this for each input selector by selecting the “- - - - -” option.

Composite video, S-Video,
component video		HDMI
	IN
OUT
Composite video, S-Video,		HDMI
component video
Here are the default assignments.
Input selector		Default assignment
BD/DVD		HDMI1
VCR/DVR		HDMI2
CBL/SAT		HDMI3
GAME		HDMI4
PC		HDMI5
AUX		FRONT (Fixed)
TUNER		- - - - - (Fixed)
TV/CD		- - - - -
PHONO		- - - - -
PORT		- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,

TV/CD, PHONO, PORT

`HDMI1, HDMI2, HDMI3, HDMI4, HDMI5: Select the HDMI IN to which the video component has been connected.

`- - - - -:

Output composite video, S-Video, and component video sources from the HDMI OUT. The video out- put signal from the HDMI OUT is the one config- ured in “Component Video Input” (➔ 43).

•“AUX” is used only for input from the front panel.

•Each HDMI input cannot be assigned to two input selec- tors or more. When HDMI1 - HDMI5 have already been assigned, you must set first any unused input selec- tors to “- - - - -” or you will be unable to assign HDMI1 - HDMI5 to input selector.

En

42