Onkyo HT-RC270 About USB, USB Mass Storage Device Requirements, Supported Audio File Formats

■Gateway

If you set the “DHCP” setting to “Disable”, you must specify a gateway address.

Enter the gateway address provided by your ISP.

■DNS Server

If you set the “DHCP” setting to “Disable”, you must specify a DNS server.

Enter the DNS server addresses provided by your ISP.

■Proxy URL

To use a Web proxy, enter its URL here.

■Proxy Port

If you’re using a Web proxy, enter a proxy port number here.

■Control

This setting enables or disables control over the network.

`Enable:

Control over the network enabled.

`Disable:

Control over the network disabled.

Note

•When set to “Enable”, power consumption on standby mode slightly increases.

■Port Number

This is the network port used for control over the network.

Note

• Set the port number between from “49152” to “65535”.

About USB

USB can be used to play music files stored on USB mass storage devices (e.g., USB flash drives and MP3 players), which can be plugged into the AV receiver’s USB port.

Supported Audio File Formats

For USB mass storage device playback, the AV receiver supports music file formats.

See “Supported Audio File Formats” (➔ 62).

USB Mass Storage Device Requirements

•The AV receiver supports USB devices that support the USB mass storage device class.

•Playback may not be possible with some USB devices even if they conform to the USB mass storage device class.

•USB devices formatted with the FAT16 or FAT32 file system are supported.

•If the storage device has been partitioned, each section will be treated as an independent device.

•Each folder may contain up to 20000 music files and folders, and folders may be nested up to 16 levels deep.

•USB hubs and USB devices with hub functions are not supported.

Playing Music Files on a USB Device

This section explains how to play music files on a USB mass storage device.

DISPLAY

NET/USB

ENTER

q/w/e/r

RETURN

1, 3, 2, 5, 4, 7, 6

REPEAT

RANDOM

En

66