Source Setup |
|
| Preset Name For Input Selector | |||
|
|
|
|
| ■ Name | |
1 | 2 | 3 | 4 “Setup” 5 | |||
`- - | ||||||
|
|
| ||||
|
|
| ||||
Items can be set individually for each input selector. | CableSTB, SAT STB, PS3, Wii, Xbox, PC, TV, CD, | |||||
TAPE, iPod: | ||||||
|
|
|
|
| To reset to the default, select “- - | |
Preparation |
|
|
| |||
|
|
| You can enter a preset name for each individual input | |||
Press the input selector buttons to select an input source. |
| |||||
| selector for easy identification. When entered, the preset | |||||
|
|
|
|
| ||
|
|
|
|
| name will be displayed. |
Menu | Source Setup |
| Note |
Advanced Operations
Audio Selector
■Audio Selector
`ARC:
The audio signal from your TV tuner can be sent to the HDMI OUT of the AV receiver.*1
With this selection, the TV’s audio can be automatically selected as a priority among other assignments.
`HDMI:
This can be selected when HDMI IN has been assigned as an input source. If both HDMI (HDMI
A/V Sync
■A/V Sync
`0 msec to 400 msec in 10 msec steps.
When using progressive scanning on your
To view the TV picture while setting the delay, press
ENTER.
To return to the previous screen, press RETURN.
The range of values you can adjust will depend on whether your TV or display supports HDMI Lip Sync and if the “LipSync” setting is set to “On” or not (➔ page 48).
•You can’t assign the same preset name to multiple input selectors.
•This setting cannot be used for the AM, FM, NET or USB input selector.
IN) and digital audio inputs (COAXIAL IN or OPTICAL IN) have been assigned, HDMI input is automatically selected as a priority.
`COAXIAL:
This can be selected when COAXIAL IN has been assigned as an input source. If both coaxial and HDMI inputs have been assigned, coaxial input is automatically selected as a priority.
`OPTICAL:
This can be selected when OPTICAL IN has been assigned as an input source. If both optical and HDMI inputs have been assigned, optical input is automatically selected as a priority.
`ANALOG:
The AV receiver always outputs analog signals.
Note
•A/V Sync is disabled when the Direct listening mode is used with an analog input source.
•This setting cannot be used with the NET input selector.
You can set priorities of audio output when there are both digital and analog inputs.
Note
•This setting can be made only for the input source that is assigned as HDMI IN, COAXIAL IN, or OPTICAL IN.
*1 You can select “ARC” if you select the TV/CD input selector. But you cannot if you’ve selected “Off” in the “Audio Return Ch” setting (➔ page 48).