Onkyo MD-105X manual Message list, Other Information, Meaning

Other Information

Message list

The following table explains the various messages that appear in the display.

Message	Meaning
Blank Disc	A new recordable MD or a recordable MD without disc or track names is inserted.
Cannot Copy	An attempt was made to make a second copy from a digitally dubbed MD (see "Rules for Digital
	Recording" on page 48).
Cannot Edit	An attempt was made to edit the disc during MEMORY or RANDOM play or in recording standby
	mode, or an attempt to edit a premastered disc was made.
Cannot Rec	An attempt was made to record onto a premastered (read-only) disc.
D. In Unlock	The digital equipment (CD player, DAT, etc.) has not been connected properly. Otherwise, the
	connected digital equipment is not operating properly.
Disc Error	The disc is abnormal (scratched or missing a TOC).
Disc Full	The disc is full (see "System Limitations" on the next page).
Impossible	The disc could not be edited.
Mecha Error	An error occurred in the unit’s internal mechanism.
Memory Full	An attempt was made to record a 26th track.
Name Full	Number of caracters has reached the limit for input to one MD.
No Change	The naming attempt failed.
No Disc	There is no disc in the unit.
No Track	The inserted disc has a disc title but no tracks.
Not Audio	An attempt was made to play a non-audio disc.
Over	In pause mode (when playing is paused), the f (Fast Forward) button was pressed to the end
	of the disc.
Protected	The inserted disc is record-protected.
Retry Error	The recording attempt failed due to a consecutive disturbance or scratches on the MD.
Temp Over	An abnormally high temperature is detected in the unit’s internal mechanism.
U-TOC Error	The writing of the recorded or edited contents Failed.
TOC Writing	The unit is writing the recorded or edited contents to the MD.
Full	An attempt was made to enter a character over the maximum character capacity while naming.

46