![Installation (continued)](/images/new-backgrounds/21747/2174711x1.webp)
Installation (continued)
Installation Precautions
Install the unit on a level, stable surface. The unit may fall if you install it on a tilted or unstable surface. Follow the requirements below to place the unit on top of a TV:
•The TV surface on the top side is larger than the bottom surface of the unit.
•The TV surface is level and not tilted.
•The TV is not on an unstable surface.
To prevent the
If you cannot fix the unit using a rope, attach the
Note 1: The
Note 2: Make sure that the surface on which you wish to attach the
●Attaching
| Attach the included | |
| pads in the left and right corners | |
| on the bottom of the unit as | |
| shown in the figure. If the unit | |
| can not be secured with the pads, | |
Bottom of the unit | attach the | |
on top of the pads. | ||
|
6
Do not place the unit in the following locations:
Where the width of the TV | Where the top surface |
is narrower than the unit. | of the TV is tilted. |
Where the vent holes on the bottom of the unit are blocked.
Secure the unit against the wall using a strong rope to prevent the unit from falling. (Be sure to secure the unit against the wall at two places.)
Use this slot to tighten the rope.
Wall
TV