Onkyo PHC-5 Connections continued, Connecting the subwoofer, SKW-320, SKW-310,etc

Models: PHC-5

1 20
Download 20 pages 57.41 Kb
Page 8
Image 8
Connections (continued)

Connections (continued)

Connecting the subwoofer, SKW-320, SKW-310, etc.

Connect the subwoofer Optional Onkyo subwoofer SKW-320, SKW-310, etc. to the SUBWOOFER PREOUT jack on the PHC-5.

We recommend you connect a subwoofer to take the best advantage of the virtual surround effects.

Subwoofer with built-in

: Signal flow

amplifier (active)

 

(SKW-320,

 

SKW-310, etc.)

Included

LINE INPUT

L

 

R

Monaural audio connection cable

 

You may connect the cable to either L or R

 

input, if applicable.

 

TIP

PHC-5

 

You can connect any subwoofer with a crossover frequency between 100Hz and 200Hz. Place the subwoofer in the optimum position.

The location of the subwoofer significantly changes the effects. In most cases, place it in the corner of the room to get the best results.

Refer to the instruction manual that came with the subwoofer for more information.

Connecting to VIDEO/AUX INPUT jacks

Use the VIDEO or AUX input jacks for connection in the following cases:

To connect another audio or video device.

Lower the volume level on the PHC-5 before you change an input source using the INPUT SELECTOR, since the input level of a device such as CD player connected to the VIDEO or AUX input jacks may be different from the input level of the TV and selecting a different input source may produce a loud sound.

To connect your VCR directly to the PHC-5, since your TV does not have audio output jacks.

To connect your VCR directly to the PHC-5, since your TV has “variable” audio output jacks. (Refer to the “CAUTION” on page 7.)

To connect your VCR directly to the PHC-5, since your TV outputs audio signals during programmed recording on the VCR even if the power to the TV is turned off. (Refer to the “CAUTION” on page 7.)

Use the cable included in the device for connection. Connect the stereo audio connection cable as follows:

To the audio output L ch. jack of the device...white

white...PHC-5’s AUX or VIDEO input L ch. jack

To the audio output R ch. jack of the device...red

red...PHC-5’s AUX or VIDEO input R ch. jack

Plug the cables securely. Incomplete connection may cause noise or malfunction.

Refer to the manual for your AV device for more information on AV output connections.

: Signal flow

CD player, MD player etc.

Audio Output

L

PHC-5

R

Audio Output

VCR, LD player or DVD player etc.

L

R

8

Page 8
Image 8
Onkyo PHC-5 Connections continued, Connecting the subwoofer, SKW-320, SKW-310,etc, Connecting to VIDEO/AUX INPUT jacks