Onkyo PHC-5 Connecting to the TV IPM system, What is IPM Intelligent Power Management system?

Connections Do not plug the power cord into the AC outlet until all connections are completed.

Connecting to the TV (IPM system)

•Use the cable included in the package for connection. Connect the stereo audio connection cable as follows:

To TV’s audio output L ch. jack...white	white...PHC-5’s TV input L ch. jack
To TV’s audio output R ch. jack...red	red...PHC-5’s TV input R ch. jack

•Plug the cables securely. Incomplete connection may cause noise or malfunction.

•Refer to the manual for your TV or VCR for more information on AV output connections.

CAUTION

•Be sure to connect fixed output to the “Fixed” audio output jacks. For variable output, refer to the manual for your TV to turn the internal speakers off.

Lower the volume level on the PHC-5 before you change an input source using the INPUT SELECTOR, since the input level of a device connected to the VIDEO or AUX input jacks may be different from the input level of the TV and selecting a different input source may produce a loud sound.

•Some TVs may output audio signals even if the power is turned off. If such a TV is connected to a VCR that is programmed for recording, the IPM system may be enabled. To make sure that the IPM system is disabled, turn off the POWER switch on the PHC-5 or connect the TV output to the VIDEO or AUX input jacks. Refer to the “Connecting to VIDEO/AUX INPUT jacks” section on the next page.

What is IPM (Intelligent Power Management) system?

If the TV audio output is connected to the unit’s TV in jacks, turning on (off) the power to the TV will automatically turn on (off) the power to the unit. This is called the “IPM system.”

PHC-5

TV

Video Cassette Recorder

PHC-5 rear panel

�

Read the

“CAUTION” described

above.

Audio Output

Variable Fixed

LL

RR

Audio Input

L

R

Audio Output

L

Improper connection

Insert completely

*Be sure to connect fixed output to the “Fixed” audio output jacks. For variable output, refer to the man- ual for your TV to turn the internal speakers off.

*If you have a video cassette recorder, connect it to the Audio Input on the TV or INPUT VIDEO jack on the PHC-5.

: Signal flow

R

NOTE

•When you listen to the TV sound through the unit, turn down the TV volume to minimum. Sound coming from the TV itself may reduce

the surround effect. 7