Precautions

Before using the RDA-7.1 power amplifier, be sure to read the page above entitled Important Safety Instructions and this page of precautions.

Power cord

The RDA-7.1 comes with a three-pronged power cord that contains a grounding wire. To help prevent electrical shocks, always insert all three prongs when plugging in the power cord. If the plug of the power cord is not properly plugged in all the way, it may lead to an electrical shock.

Be sure to only use wall sockets that properly fit the plug of the power cord. If the socket does not match the plug of the power cord, you will need to prepare an adapter. Always use an adapter that is properly certified for this application.

WARNING:

THIS APPARATUS MUST BE EARTHED.

AC fuse

Never plug the power-supply cord while the fuses installed on the RDA-7.1 are removed.

For replacing the fuse, make sure to contact your Integra/ Onkyo authorized service center or your Integra Research dealer.

Speakers

Connected speakers should have an impedance of 4 ohms or greater. If speakers with an impedance of less than 4 ohms are connected, it may damage the RDA-7.1.

Ventilation

The RDA-7.1 is a high-power amplifier, so the internal temperature of the device rises to a high temperature. Therefore, place the RDA-7.1 in a location where the flow of air around the device is good. Also, do not place objects or other system components on top of the RDA-

7.1or block the ventilation holes in any way. This may cause the internal temperature to rise and lead to a malfunction or damage the internal components.

Care

From time to time you should wipe the front and rear panels and the cabinet with a soft sloth. For heavier dirt, dampen a soft cloth in a weak solution of mild detergent and water, wring it out dry, and wipe off the dirt. Following this, dry immediately with a clean cloth. Do

not use rough material, thinners, alcohol or other Chemical solvents or cloths since these could damage the finish or remove the panel lettering.

Whenever performing maintenance on the RDA-7.1, any of its supplied accessories, or any device connected to it, do not use solvents or cleaners of any kind that are inflammable or combustible.

Other

Below is a list of actions that you should never perform.

•Never perform a “thumb test” (checking whether current is reaching the lead wire on the hot end of the input by touching it with your fingers) on the ends of the input jacks or input cables. Doing so may damage the speakers.

•Never short-circuit an output terminal.

•Never remove the cover of the RDA-7.1. Furthermore, never operate the RDA-7.1 when the cover is removed for any reason.

•Never operate the RDA-7.1 in environments with explosive gases or materials.

•Do not install the RDA-7.1 in a location within the reach of small children.

Lightning storms

Never touch the power cord or plug of the RDA-7.1 during a lightning storm.

Power

WARNING:

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., AC 120V, 60Hz)

Warranty Claim

You can find the serial number on the rear panel of this unit. In case of warranty claim, please report this number.

Recording Copyright

Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder.

5

Page 4 Page 6
Page 5
Image 5
Onkyo RDA-7.1 instruction manual Power cord, AC fuse, Speakers, Ventilation, Care, Other, Lightning storms, Warranty Claim
Page 4 Page 6

RDA-7.1 specifications

The Onkyo RDA-7.1 is a high-performance AV receiver designed to elevate your home entertainment experience. This unit stands out in the crowded market of audio-video receivers, offering a blend of advanced technology, quality construction, and user-friendly features.

One of the primary highlights of the RDA-7.1 is its 7.1 channel surround sound capability. This allows users to immerse themselves in a true cinematic audio experience, whether they're watching movies, playing video games, or listening to music. The receiver boasts a robust output power rating, delivering clear and dynamic audio that fills the entire room.

The Onkyo RDA-7.1 supports a variety of audio formats, including Dolby Atmos and DTS:X, which provide three-dimensional soundscapes by adding height channels to traditional surround sound setups. This feature significantly enhances the realism of audio playback, making you feel as if you are part of the action.

Connectivity is another area where the RDA-7.1 excels. It comes equipped with multiple HDMI inputs, allowing for seamless integration with a range of devices, including Blu-ray players, gaming consoles, and streaming devices. The receiver also supports 4K video pass-through and HDR, ensuring that your visual experience is just as impressive as the audio.

In terms of user interface, the RDA-7.1 offers an intuitive on-screen display that simplifies the setup process. It also includes an auto calibration feature that optimally adjusts the audio output based on your room's acoustics, making installation straightforward and hassle-free.

Additionally, the RDA-7.1 is designed with music lovers in mind. It features a high-quality DAC (Digital-to-Analog Converter) that enhances audio fidelity. This ensures that whether you're streaming music from your favorite service or playing back your carefully curated collection, you can expect superb sound quality.

With durable construction and a sleek design, the Onkyo RDA-7.1 fits seamlessly into any home theater setup. Its combination of powerful audio performance, advanced surround sound technologies, extensive connectivity options, and user-friendly features make it a prime candidate for anyone looking to enhance their home entertainment system.
Top Page Image Contents