Troubleshooting guide |
| Specifications |
If the
POWER
No power.
•Power cord is not correctly plugged into AC outlet/ Inlet.
➞Plug the power cord into the AC outlet/Inlet properly.
•Power switch is not set to ON position.
➞Set the power switch to ON.
Power turns on but no sound.
•Incomplete connections.
➞Check speaker cable connections.
➞Insert all plugs firmly into jacks.
•No input signal from AV controller.
➞Check for input signal from AV controller.
•Incorrect INPUT SELECT switch setting.
➞Set INPUT SELECT switch to correct setting.
The Standby indicator flashes.
•Protective circuitry activated.
➞A problem such as a speaker cable shorting or the temperature of the
AMPLIFIER SECTION |
|
Number of channels: | 7 |
Power: |
|
150 watts per channel min. RMS at 8 ohms, 2 channels driven from 20 Hz to 20 kHz with no more than 0.1 % total harmonic distortion (FTC).
300 watts per channel min. RMS at 4 ohms, 2 channels driven at 1 kHz with no more than 0.1 % total harmonic distortion (FTC).
350 W (EIAJ, 4 Ω, 1 kHz, 10 %)
300 W (DIN, 4 Ω, 1 kHz, 0.7 %)
Frequency response at | 3.5 Hz - 250 kHz |
Input Impedance: | 47 kohm each phase |
Input signal for max output power: | 1.2 V |
Input Sensitivity (Unbalanced): | 100 mVrms |
Input Sensitivity (Balanced): | 200 mV |
THD: | 0.03 % (20 Hz to 20 kHz) |
Damping Factor: | 40 at 8 ohm |
Power consumption |
|
USA, Canada and some Asian model: | |
| 15 A |
Other models: | 10 A |
Rated Speaker Impedance: | 4 ohms |
GENERAL |
|
Power Supply: | AC 120 V, 60 Hz |
| AC 230 V, 50 Hz |
| AC 220 V, 50/60 Hz |
Dimensions (W ⋅ H ⋅ D): | 450 ⋅ 197 ⋅ 602 mm |
| |
| ⋅ |
Weight: | 52.5 kg, 115.7 lbs. |
Specifications and features are subject to change without notice.
Power supply and voltage vary depending on the area in which the unit is purchased.
15